Hi thanks for reply
i am getting success for the 1st schedule but subsequent ones dont appear on the list at all, so they are ignored.
and i cannot see any attempts in windows event log.
Hi
New CCR working on ipo 500 V2.
sw version 6.08
daily report schedule and daily stats reset only works once
as if i have scheduled a one off and not a daily task.
Have i given supervisor the rights to schedule tasks? = yes
Any help?
thanks in advance.
Thanks for reply tl,
i have looked but no such (IPOffice_56xx_46xx_vpn.zip)file there.
other files yes. but none with above filename.
Are you saying i dont necessarily need the above file?
bin folder files =
46vpnsetting_readme
46vpnsetting_Template
46vpnsetting_Template
46xxvpn.mib
46xxvpn.scr...
Hi
Im trying to set up a 5610 sw IP phone for remote vpn working , so i am following the admin guide that came with the Admin CD.(bin folder...unzip etc)
system is a ip 500 v2 sw-6.08.
however im not sure i have the correct files, as there is mention of a IPOffice_56xx_46xx_vpn.zip file that i...
Hi
i am trying to install a quescom GSM gateway TO Nortel CS1000 V5 via SIP(TRUNKS).I have linked the quescom to several other ipbx's -no probs at all.I am using standard SIP protocol udp port 5060 etc etc (no registration required).However the nortel and the quescom wont communicate. ping is...
Hii am trying to install a quescom GSM gateway TO Nortel CS1000 V5 via SIP.I have linked the quescom to several other ipbx's -no probs at all.I am using standard SIP protocol udp port 5060 etc etc.However the nortel and the quescom wont communicate. ping is ok, no firewall issues. Any help on...
Hi
i am trying to install a quescom GSM gateway TO Nortel CS1000 V5 via SIP.
I have linked the quescom to several other ipbx's -no probs at all.
I am using standard SIP protocol udp port 5060 etc etc.
However the nortel and the quescom wont communicate. ping is ok, no firewall issues. Any help...
Thanks for replies guys
i am on level 8.0 latest release ur4 i think.
Im using SIP trunks as these are my connection to the outside world - no other lines... isdn ..BRI...etc
I will try applying set COR to Trunk COR as per KWP
thanks again
Hi
I have 2 3300's linked via IP Trunks.
Site A has SIP trunks Site B has no Trunks, so it uses Site A's Trunks.
How Does Site B's COR work?
In other words i want to have separate out dialling for each site.
As i understand it if site B dials 907XXXXXXXXX
this will follow its own COR first but...
can you help? icp 3300 7.1
I have a similar problem with random handsets losing comms.
reboot phone a couple of times then its ok. here is a sample of messages i get in maint logs:
Maintenance 3860 Info 2007/Apr/02 12:55:48 Device Detection "An IP device, with DN 554, registered at CDP L2 MAC...
sw-7.1 3300 ICP cx controller.
handsets: 5235's basic voicemail licence.
all i am trying to achieve is :
DDI call comes in on a PRI Trunk.During the day calls
Ring all phones(approx 10) on multicall keys.-no voicemail
or anything else needed here. so far easy!
During night service i need...
hi
im trying to get MW to work on my alog handsets which have an LED on them.
when i leave a vmail message light stays off.
SW = 7 rev 2
using ASU
on MX controller.
thanks in advance
site A:
412 latest 3.0 DT, 2030 phones,vmpro, softconsole latest2.1
site B: 406 latest 3.0 DT, 2030 phones.
Problem: when a site B extn presses divert, it appears as such on softconsole at Site A, so far ok.
when the same extn takes off divert, it does not refresh on softconsole, so appears as...
Hi
Version 6 IP 5550 console keeps going into night service randomly.
changed all wiring, network card and port on switch.
still no luck.
any comments/ suggestions?
thanks in advance
Hi
Im due to link up 2 ip 403's 0n S/W 2.1.27 over a Frame Relay Wan link. ive got as far as installing both voice compression modules, connecting the WAN cables to back of IP403's and re-booted.
im hoping to use the 403's to route voice and data accross sites, with QOS. the 403's will act as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.