Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mmcgurty

    Cisco 2900XL series problems

    We tried both sides set to Auto/Auto and 100/Full, thinking it might be the 1000mb adding something to the mix since we are only 100mb ports. Neither made a difference in the connection until we added "spanning-tree portfast" to the port. At first, I thought maybe it was a feature added since...
  2. mmcgurty

    Cisco 2900XL series problems

    Couldn't you introduce bridge loops in your switches when you enable spanning-tree portfast on all ports but uplinks? Especially when people still plug in hubs, unmanaged switches, etc?
  3. mmcgurty

    Cisco 2900XL series problems

    No, the Cisco 2950's have not been globally nor individually configured for spanning-tree portfast. I suspect it may be a case of the PVST support. I checked one of the Cisco 2950's and it showed this "spanning-tree mode pvst". I appreciate the information thus far, that might be something...
  4. mmcgurty

    Cisco 2900XL series problems

    I was wondering if anyone else has had this issue. Recently we purchased a mass quantity of Dell GX620 towers. When we plug them into a Cisco WS-C2950-24, they seem to autonegotiate just fine. However, when plugging into a Cisco WS-C2924-XL-A or WS-C2924-XL-EN the port will go through STP...
  5. mmcgurty

    Routing for 2 subnets

    You could do virtual interfaces on a router using ISL or 802.1Q encapsulation types, then VLAN for each network based on port on your manageable switches. You could also do secondary addressing on your Cisco router interface. For example: interface FastEthernet0/0 ip address 192.168.1.1...
  6. mmcgurty

    Benefits of Layer 3

    I've got what I hope is an interesting question. What are the benefits to a Layer 3 switch being installed in a prodominately Layer 2 switched network? What will I gain by doing say a Cisco 3750 where I used to do a "router on a stick" approach? What would I gain security feature wise? One...
  7. mmcgurty

    Online-Insertion 3745 Router

    Yeah, I was afraid of that. I looked all over Cisco and tried Google with no results either way. Usually thats a pretty good indication that they don't do it. I know for a fact the network modules are hot-swap, but I'm not sure if you can hot-swap the WIC's in the network-modules or not. If...
  8. mmcgurty

    Online-Insertion 3745 Router

    Does anyone know if the WIC ports in a 3745 support Online-Insertion? For example, I want to install a WIC-2T card with the router on in WIC slot 2 (s0/2) with the power on and router running. Cisco's site is just not providing any help on this question, but from what I can tell the 3745...
  9. mmcgurty

    Maximum Number of Printers

    Does anyone know or have a reference from Microsoft regarding the maximum number of printers one can have on a Windows 2000 Server? I looked online and found all kinds of answers. I can't seem to get the right search phrase on Microsoft.com to find the answer. Any help would be appreciated.
  10. mmcgurty

    PIX 515 Top Ten List?

    I was told by a colleague that Linux Squid and Webalyzer might be the cheapest way to go on this. I appreciate all the replies to my question and the names of some software to do this. I really like that device from Network Intelligence, but that looks pretty costly. I'll be checking out...
  11. mmcgurty

    PIX 515 Top Ten List?

    I was afraid of that. I appreciate the quick reply. I think I'm going to log a Cisco TAC ticket to see, if I find out otherwise I'll post here how to do it. Do you know if the PIX can import a list of sites to block by URL or IP?
  12. mmcgurty

    PIX 515 Top Ten List?

    Is it possible to produce a Top Ten most visited sites or something like that from the PIX 515 PDM or CLI? I am running a PIX with OS 6.3(3) and PDM 3.0(1). I'm guessing I'll need something like ntop to do this, but wanted to check to make sure.
  13. mmcgurty

    HELP!

    I don't see any access lists on your configuration...you need something like this. access-list inside_access_in permit tcp any eq www any eq www Also, I don't think Cisco allows private hosts ping anything outside the e0/0 interface on the PIX by default. Hence if you wanted to ping...
  14. mmcgurty

    ICQ File Transfers PIX 501

    How can I get ICQ File Transfers to work with a PIX 501? I've looked everywhere on Cisco's site and on google and its like this subject is very nil. Any ideas would be apppreciated.
  15. mmcgurty

    lots of netbios (137) port logs

    Do you place an implicit deny rule on the PIX to keep these from coming across or is all unstated traffic from inbound connection already blocked?
  16. mmcgurty

    Cisco PIX 501 Syslog RH9

    Thanks for the reply, I think my question is more Linux related. Like how do I setup the logging on the Linux side.
  17. mmcgurty

    Cisco PIX 501 Syslog RH9

    I am hitting a brick wall trying to get my PIX 501 logging to my RH9 linux system. I am using PDM 3.0(1) and PIX IOS 6.3(3). I tried following this configuration example: http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_tech_note09186a0080094030.shtml When I do this, I...
  18. mmcgurty

    ICMP ping problem

    I have an interesting problem using Linux. From testing we've conducted, it appears that Red Hat 8.0, Red Hat 9.0, and SuSe 7.3 all have the same issue. We use Linux to monitor critical servers, routers, and switches using Nagios. We've come a long way with this, to the point that we've got...
  19. mmcgurty

    2620 Router ACL

    I am running a Cisco 2620 router connected to a Point-to-Point T1 for dedicated internet access. I am currently running 12.1(18) IP Only IOS code, and plan to upgrade to 12.1(19) this weekend due to the recent Cisco vunerability brought to light this past week. What I want to be able to do is...
  20. mmcgurty

    Cisco Syslog for Red Hat Linux like Kiwi Syslog

    Bluecrack, I was afraid I'd get that answer. I did immense amounts of searches on the internet and was unable to find a script or additional program that specifically addresses this kind of need. I would be interested to see those perl scripts if you are able/allowed. I don't want you giving...

Part and Inventory Search

Back
Top