Search results for query: *

I tried booting directly to the device. {0} ok test /pci@1f,4000/scsi@3/disk@6,0:f {0} ok test /pci@1f,4000/scsi@3/disk@6,0 {0} ok boot /pci@1f,4000/scsi@3/disk@6,0 cdrom tested fine but basically it hangs right on the last command, no prompt, cdrom stops after 15 second. CD if fine as I...

maybe if you provide a little more info someone might be able to help. Your description is too general. Maybe info like nic brand, model or you can specify default nic, maybe provide some snipets from logs might be helpfull. Does the switch keeps a yellow light or green light in the port your...

Hello Guys, After having my Ultra80 for many years now, for some reason one day the box just became unresponsive. After finding out that my eeprom basically got corrupted I decided to reprogram it using a procedure that I found on the web. I can get to OBP, I can test all devices with success...

Thats what I though, I just wanted to get a second opinion. Thank you for your response. PopK0rn

After PSM lun is created. 0,1,2,3 are used for the PSM lun. I have 30 total drives and I would like to create 1 raid 5 using the space left on the PSM Lun and all the space of the other 26 drives. The question that I have is, is there a way to use the space left on the PSM lun combined with...

most of the gbit nics that have some sort of Realtek 8169 flavor in it. Chances are you will probably have issues get to work in other something that 10mbit H/D. Well, There is a trick to this madness. If you notice, there is no rge.conf in /kernel/drv. Create rge.conf with your favorite...

OK, I would like to make some clarifications to this post as many of you know me by now, I always paste my problems but I also post very specific solutions to my problems once I do find them. I am a very stuburn when it comes to problems and it might take me time but I do get them resolved. Its...

Sorry I took so long to reply. The boot you see is from the embedded prom. My problem I just come to realize is that I do not have flare installed on any of the drives. After getting flare copied it should all work out. popkorn

iowadba, you mentioned that you might have other ideas to get this thing going. I would like to try what ever you had in mind since serial is just not going to work. Thanks PopKorn

I pulled the hard drive out of one of the units, the laptop drive on the SP and here is some of the contents so I know this thing has to work somehow. I can ping the SP but thats about it. I checked some of the files and it seems this unit was fully configured. IS there a way to reset this...

Not having very much Luck with this. anyone has any ideas? PopKorn

OK, some progress finally. I guess I was outside the subnet and that why I could not ping it. The SP is 172.20.231.162 and I gave the work station .161 and now I can ping .162 so that a start. I performed an NMAP on 162 with the same results, no ports opened. So, I am going to try and install...

Yup, I totally agree with you. The problem is that it is not connecting. I have tried with 3 machines using 2 null modem cables I had and I even went to the store to pick up a third one just in case. I know the null modem cable works because I can see the boot screen. I have ran tcpdump and...

OK, progress report. I was able to break the boot process. All you need to do is type Y really quick when it asks you if you want to bybass autoboot. So now I am in the K10> prompt. I can provide some more info. K10 > @ boot device : fei unit number : 0 processor number...

Update, I figured since I had a spare processor card, I took out both it had and only plugged in the new one. To my surprise, I was able to authenticate and establish a serial connection at 115K and I was also able to ping 192.168.1.1 . How ever the serial connection dropped right when I was...

More info on this, I have scanned my network and I did noticed that the management port has an ip of 172.20.231.162 and I saw netbios packets on 137. I grabbed the laptop plugged into the switch and assiged myself 172.20.231.1. I tried to telnet to this ip, no good I tried to use the web...

BY the way, I do see the on the boot up menu on the monitor about 4 different boot opentions and the default one is the RAS one. PopKorn. P.S. It just does not make any sense unless they have configured it to use the management port via engineering mode which is what I am going to try next...

Well, I tried many of the ones I had here and I even went as far as going to the store and bought a new one just in case. I tried all the differnt speeds and it just did not responded. any ideas? Much appreciated... PopKorn

I will try that for sure, Just having a hard time finding a null modem cable, every one I have does not say null or it jus does not work.. got to hit the store in the morning and post back. Much appreciated. PopKoRn

Hello All, I just aquired an used FC4700 LongBow running vxworks and NT kernel. I am having a little problem getting to break the sequence in order to reach fcli> I have searched the forums and I have tried the following @$@$ {}{} even connected monitor keyboard and mouse and still. ON the...