Search results for query: *

It took 16 minutes to reboot and about 4 hours later (6:15am) I tried calling into the office from home and got a fast busy. I checked with our phone company and they showed no issues so I came in early and was able to log into the admin gui and my settings (L2 IP) had taken. I decided to undo...

I’m not sure if it was related but after the reboot we lost all phone service. After rebooting the system several times I got the service back and the ARP went away. I guess the problem is solved until we need to reboot the system again. Marty

Thanks Supernova, we will see what happens tonight. Marty

I assumed you can just use an unused IP on my 10.0.1.x network but I got a message saying the system would need to be rebooted and I wasn't positive if it would do it if I clicked OK, so I cancelled out of changing it. Bosses don’t like their phones going down in the middle of the day. I will...

Hi Supernova99, It looks like the Layer 2 switch IP is not set and I don't appear to have an E2T card. What should I put as an IP? Here is the System IP Configuration: System IP Address: 10.0.1.10 Subnet Mask: 255.255.255.0 Gateway IP Address: 10.0.1.4 Layer 2 (L2) Switch IP...

We have a Mitel 3300 MXe with one IP phone on or network and the system will send a network ARP every 1 second looking for address 192.168.1.2 but all our network equipment have an 10.0.1.x address. The 3300 is at 10.0.1.10 (on switch port 1 of 2) and the IP phone on 10.0.1.150. We are not...