Search results for query: *

Hello ClimbingColorado, I think tonight I was trying to do exactly same thing. Use PIX to sent all traffic from VPN client through external interface and using NAT. I had problems and found this post. I also have second PIX and also no luck. Sounds like intelwizrd might be right about...

Thanks This is not about the configuration on the PIX or the laptop. I am able to connect from another location. Same laptop connected to another network and can not ping, connect, nothing. looks lie this is the device beetween us. I was able to connect and authenticate. In the network monitor...

Hi, PIX 506E and Cisco VPN Client 4.0.3C I can establish VPN session, enter user name and password. Get the DNS, WINS servers. but the default gateway is empty. I can not get to any resources in internal network. This is only on one laptop. Other machines work fine. any idea? removed Sygate...

I found the problem: had to change access-list inside_outbound_nat0_acl permit ip any 172.17.2.0 255.255.255.0 to access-list inside_outbound_nat0_acl permit ip 200.200.200.0 255.255.255.0 172.17.2.0 255.255.255.0 access-list inside_outbound_nat0_acl permit ip 200.200.201.0 255.255.255.0...

Hi, We use PIX 506E and VPN Client 401 our vpn users can access internal machines but they can not access internet ping to internal hosts works but they can not ping anything outside. is this because of the NAT disbaled for VPN pool or the permitions? regards xdeq interface ethernet0...

and one more thing I agree with BuckWeet that having "ISP router at 200.200.200.1, and your firewall at 200.200.200.2" would solve the problem. but in this case I have to dedicate one public address on ISP router. and can not use it on PIX for static any more. Robert

Guys thank you for the reposnse. 308win this is not about routing from isp. because I am connected to the network 172.17.1.0 I can ftp to 200.x.x.10 so that means that static works fine even if the interface ip is 172.17.1.1. I believe that after I do add route 200.x.x.x mask 255.255.255.248...

P.S. my client computer is connected to 172.17.1.0 network IP:172.17.1.100 gateway:172.17.1.1 static mappings work fine telnt 200.200.200.10 ftp 200.200.200.10 the idea is that client will connect from the internet so I'd like to use public address 200.200.200.14 rather then ip on outside...

| | 192.168.1.254 PIX global (outside) 1 200.200.200.14 | 172.17.1.1 | | 172.17.1.2 ISP router | 123.123.123.1 | internet I use have PIX 506E and VPN Client 4.0.1 I can establisch vpn connection when use ip address of external interface (172.17.1.1). But it does not work when I try to...

I found this site very useful. So keep posting new questions. I study Cisco PIX Firewall and VPN Configuration Guide, Version 6.3 http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/config/ and can not find the section where they clearly describe what needs to be done to: 1...

I think this is simple question since many of you have this configured already. what should be addressing on my external interface, on segment between PIX506E and ISP DSL router? I have 5 public ips from the ISP. internal interface is 192.168.1.1 can I use addresses 172.16.1.1(PIX)...