Search results for query: *

Definately go with something like the 2960 or if you really want to go cheap you could get a used 3550 with an sx gbic. WWW.CCCMN.COM

I do know the procedure for removing the password for the 3c93011. The only problem is that it wipes out the old config but if that is ok try this: power up the unit, during power up there will be a line reading loading sysboot. When you see this hit enter repeatedly until it breaks. There...

I could still use the Manuals if you have them. I can not find a downloadable version. Thanks for any and all help!

I recently purchased a used CVX 1800 and I did not get a manual or user guide. I am not familiar with this product at all so this should be a fun time. I would like to know the default password and login. If anyone knows that it would be a great help and a good start. Thanks!

There is a way. Using this method will wipe out the entire configuration as well as the password. When commected to the switch during boot you will see the phrase "loading sysboot" 2 times. When you see this phrase the second time hit enter repeatedly until you come to a software...

You should be able to download from the prompt you have. You need to fill in all the information that is in the sample configuration. Missing arguement is the error that you recieve when one or more of the parameters are missing. For the ss9300's if you have a firmware level below 2.0 you must...

Does anyone know of a password removal procedure or backdoor password for a 3com SuperStack 3 switch 4900. I have no access to the admin level right now. Thanks for any help?

I need to find a password recovery procedure for the EME(Enterprise Mananagement Engine). If anyone knows a backdoor password or a password recovery procedure it would be greatly appreciated. Thanks!!!!

That is all I know. I am receiving a "KERNEL error" and the system locks up and I am forced to reboot. I am getting the error inconsistently and I don't know what is causing the error. Any feedback would be greatly appreciated. Thanks.

You can reset the password. This is a method I found by trial and error so there may be a better way. power up the unit and when all the LEDs flash hit the reset button on the back side. This should allow you to perform a software upgrade. Enter all the information needed and when the...

NetICs is a backdoor password, power up and wait for the login prompt. When asked for the password enter NetICs(case sensitive). It will not work with the newer firmware versions.