Search results for query: *

What type of SIP phone? Most phones you can configure a "park" key which will do the trans/100/trans for you with one push of a button and then you could program BLF keys on spare line buttons for the park slots (101,102...). I do this all the time using Cisco SPA5XX sets

Most Paging Vendors have some IP-enabled paging adapter that can register with UCX as a SIP extension (unfortunately that eats up a licence). Then all you need to do is call that extension from any phone and you can page and can also add it to any page group you might want to build to page both...

Just to be clear when you state that you dial the parking lot location you mean the pilot park number (100) that you set up in the parking module. So : answer call, press transfer, dial 100# (pound sign sends the digits immediately), wait for announcement and press transfer again. Should work...

PBX tab/ Tools tab/ Configuration file editor on left/ click over to page 2/ click on dahdi-channels.conf and change switchtype to what you need. Don't forget to click save and reload config

A great free client that does both SIP and IAX2 And works on both Android and iPhone is Zoiper

Thanks UCXguy. I will give it a try

Anyone know of best way to test for PRI troubles? Any way to STAT D-channel for issues with carrier as with old Nortel switches? I can do a 'PRI show channels' and a 'PRI show span 1' in the asterisk CLI tab under tools but that doesn't tell me much. I have a PRI that occasionally drops calls...

The simplified version would be: PBX side - log in, click on PBX tab and Generic SIP device. Enter extension number, name and a strong password (secret tab) plus any other option you might want to add for the device and then click submit and then reload. Phone side - Most phones can be...

I have uninstalled the program and reinstalled. This worked a few months ago with the last batch of windows updates but not this time.

Is anyone familiar with outlook 2003 and call pilot player? It seems Outlook was updated and now when voicemails are downloaded to the PC Outlook doesn't associate them with the player. Instead of a phone icon I now have a memo pad so when I attempt to play the message a generic box opens up...

Thanks for the responses. I have tried it with supervision turned on and off and still same problem. The strange part is I did not have this trouble with the old software and startalk Thanks again

Setup: Just upgraded 0x32 to 7.1 and installed new call pilot 100 from t1 rls1 and startalk. Problem: After a caller leaves a voice mail message and user plays it back he hears dial tone immediately after the caller hangs up for about 3-4 seconds. I can hear it with test set on MDF and a test...

I just upgraded a 4.1 MICS to a 6.1 MICS XC. Upgrade went smooth but now external calls will not forward ring-no-answer to voice mail after a transfer from AA. I get the CCR recording instead. Internal calls transfer fine. Any help would be appreciated.