Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
can ping one way, but not the other, lost packets
swapped the nic... worked -
can ping one way, but not the other, lost packets
*** When I setup the switch I used the physical address given in ipconfig /all on comp 3 and entered that in as my mac address on my switch interface setup screen. I just did an ipconfig /all on all 4 comps. comp 3's physical address still matches the mac address I entered into my switch... -
can ping one way, but not the other, lost packets
I'VE NARROWED IT DOWN SOME. I'm running a dual wan switch. I have comcast and dsl. I disconnected the comcast connection through the setup interface. The computer 3 NOW works fine. So, what I've done and found out so far... started w/ computer 3. which had comcast directly into it. Then... -
can ping one way, but not the other, lost packets
I ran the 3com diag kit. Network connectivity was successful, and the card came out ok too. I've tried a few different drivers. I again tried a cable from this computer i'm on now in the one next to me w/ problems. Won't work, so its not the cable or ports. Still, its losing packets when I... -
can ping one way, but not the other, lost packets
finally had time to work on this... I looked at that article and ran the netdiag test. Looked ok. I've reinstalled the 3com driver. Tried a different cable too. It's still not working correctly. I just pinged that computer from this one. 4 Packets made it through. then tried again. 1... -
can ping one way, but not the other, lost packets
Bill, Did you mean to reference the same article/utility? I tried it w/ no success. thanx for the help. -
can ping one way, but not the other, lost packets
It is a new hard drive w/ a fresh install of win2k. No firewall or antivirus programs on it. I don't have any restrictions set on my access filters on the router. I tried changing the duplex settings. No change. -
can ping one way, but not the other, lost packets
It didn't work. I tried the utility, and I also tried manually removing both winsock and winsock2, and replacing w/ good ones. Also typed in.. "netsh int ip reset resetlog.txt" in command window. That gave me.. the command was not found: int ip reset resetlog.txt. I actually used this fix... -
can ping one way, but not the other, lost packets
Setting up 3 win2k machines on a nexland switch. 2 of the machines receive the internet fine. The 3rd one will not. All have the same workgroup name. The switch is 192.168.0.1, which I can ping from all 3 machines. The problem is when I try and ping the 3rd machine from the other 2. All...
