Search results for query: *

jneiberger, That's correct the same cable. Are there any commands that I can use to check that Router3 is actually sending keepalives on that interface? The link between router2 and router3 is fine so I would have thought so.

Hi Burtsbees The only difference between the Router1 and Router3 configs was the queueing: Router3 Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Router1 Last clearing of "show...

jneiberger, Been down this road before... I have switch router2 back on and plugged router2's cable into the 'bad interface' and the interface comes! Router1# Router1#sh ip int brief Interface IP-Address OK? Method Status Protocol BRI0...

burtsbees, I have disconnect the router2 so it is just Router1 and Router3 and still getting same error. Router1# Router1#sh ip int brief Interface IP-Address OK? Method Status Protocol BRI0 unassigned YES NVRAM administratively down...

Hi Burtsbees, As you say this should be pretty straight forward but for some reason I seem to be messing this up. I have posted the three configs, let me know what you think.

Apologies not getting this posted sooner but here are all there configs, I did a sh ip int brief as well on each router. ---------------------------- Router1 ********************** Router1# Router1#sh ip int brief Interface IP-Address OK? Method Status Protocol...

Hi Guys, Tried putting the clocking on Router 3, serial 1 interface instead of Router 1 and no joy. Seeing up down on Serial 1 interface of router 3 now. I have switched the cables back to the way they were and still getting same up down on serial 1, router 1. The routers are 2500's and are...

burtsbees, Don't worry so am I... R1 S1 to R3 S1, R1=DCE and R3=DTE, R1 with clock rate and R3 with none...does not work with any cable. R1 S1 to R3 S1, R1=DTE and R3=DCE, clock on R3...have not tried this yet, will do so this evening and let you know. Thanks

This is the third time I am changing the cable and the cable worked fine on the link it took if from - so it cannot be the cable. The interface (Router1/Serial 1) was up up a minute ago After I plugged router 2's Serial 0 DCE cable into the Router 1 Serial 1 interface. On a Cisco 2500 with two...

Hi I am really confused now. Bearing in mind that the link I am having issues with is from R1/serial 1/DCE to R3/serial 1/DTE. Router 1 was Up down and Router 3 Up Up. When I moved the cable from a working link (R1/s0 - R2/s0) on router 1 to (R1 / s1 - R2 / s0)guess what... the Serial 1...

Hi Again The layout is something like this R1 /\ R2-R3

Hi Guys, here is the configs of Router 1 and 3. Yes I do have it in a triangle with Router 1 at the top. It is the link from Router 1 to Router 3 that is giving me the problems. Router1# Router1#sh ip int brief Interface IP-Address OK? Method Status Protocol...

Thanks hope this helps.....link is between router 1 and router 3 Router1#sh int serial 1 Serial1 is up, line protocol is down Hardware is HD64570 Description: Link to Router 3 Internet address is 10.1.2.2/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload...

Hope someone can help. I am setting up a lab with three Cisco 2500 routers.I am using DCE DTE crossover cables between the routers. On one link I am getting Serial interface up down. I have checked the keep alive settings are both interfaces are set to 10 sec and encapsulation settings are both...

Have created a relationship database consisting of multiple linked tables. I would like to know if it possible in Access to create a form that has fields from two or more of the tables?

Hi I am developing a fairly simple database using Access 97 which consists of about four or five tables that are linked through relationships. My problem is that I am trying to create one insert form that inserts data into a number of tables underneath. I have tried using the wizard to create...