Search results for query: *

Is there a way to use the same macro for different HP Printers to specify a tray to print to. Everyone will be using the same Normal.dot template, but most have a different default printer. All of my printers are HP LaserJet's. All with the same setup (Envelope Feeder, Tray 1 - Manual Feed...

Is there a way to use the same macro for different HP Printers to specify a tray to print to. Everyone will be using the same Normal.dot template, but most have a different default printer. All of my printers are HP LaserJet's. All with the same setup (Envelope Feeder, Tray 1 - Manual Feed...

No problem. This is moving a 1.33GB folder that contained 3 files. HD 1 to HD 2 = approximately 64 seconds HD 2 to HD 1 = approximately 65 seconds Much better than the 15 minutes or so it took before. : )

Got it figured out. For some reason the BIOS wasn't detecting it. Turned it to Auto, now everything is cool. Thanks!

Got it figured out. For some reason the BIOS wasn't detecting it. Turned it to Auto, now everything is cool. Thanks!

It says that under the IDE Controller portion.

Both are on the Primary Channel. Ultra DMA is enabled for both drives, but Device 1 (60GB Drive) says Current Transfer Mode: PIO Mode. Any reason why?

Edit that - Both are on the Primary Channel. Ultra DMA is enabled for both drives, but Device 1 (60GB Drive) says Current Transfer Mode: PIO Mode. Any reason why?

Same IDE Cable. Ultra DMA is enabled for both drives.

Ultra DMA is enabled for both drives. Cable is correct as well.

Here is my setup: Pentium 4 - 3.2GHz 1GB of RAM Hard Drive 1 - 120GB 7200RPM ATA Hard Drive 2 - 60GB 7200RPM ATA Whenever I move or copy files between my hard drives, it is very slow. For example, a 1.5GB folder takes almost 20 minutes. Is there anything that you can think of that would cause...

Here is my setup: Pentium 4 - 3.2GHz 1GB of RAM Hard Drive 1 - 120GB 7200RPM ATA Hard Drive 2 - 60GB 7200RPM ATA Whenever I move or copy files between my hard drives, it is very slow. For example, a 1.5GB folder takes almost 20 minutes. Is there anything that you can think of that would cause...

Computer Associates. I don't remember the exact version though...

This was an old post!! I did figure it out though. : ) This issue was related to the wrong version of Antivirus software loaded on the Server. It wasn't compatible with Exchange at all, only with Windows, so the eMail Server was full of viruses. I think it was deleting the messages, but not...

Thanks for all of your replies. I had this figured out, but with year-end stuff going down, I have not had much time to reply. I am sure you guys understand that. ; ) A huge chunk of it was my Quarantine directory. I had it set to delete every 30 days, but for some reason it stopped doing that...

I tried recording it, but it goes to Tray 1 (Manual Feed) everytime. I have not edited the macro. It is a HP LaserJet 4050 with an Envelope Feeder/Tray 1 (Manual)/Tray 2/Tray 3.

I currently am in a mixed Corel Wordperfect and MS Office XP environment. I am familiar with how to setup a macro in WP to automatically select a specific tray by pushing a button I add to the toolbar. Is there anyway to setup a similar function in MS Word? If you need further clarification...

Thanks. I will let you know what I find.

Unfortunately so. I am completely baffled.

I have deleted all of the old logfiles, but still nothing has helped. :/ There is no extra software installed. Any suggestions?