Search results for query: *

Hi Thanks for the reply S/W 6.1.0.006 BN:06 F/w 6.0.06 So am i correct in assuming the arp cache should go up to 16000 before the 5520 starts to creak? born2bl8

Hi all, three quick questions & a small bit of background. (1) is there a limit on the number of entries in the ARP table? (2) where do i find it? (3) can I change/increase it? as a little background : 5520 local only routing between two VLANS. Vlan A has a device emulating 5000 plus...

there should be an option in your internet explorer (under tools/internet options/advanced I think), something like - 'display a notification about every script error' if you uncheck this then the msg should stop appearing hope this helps you

I am pretty sure you need to upgrade to 4.5 for this functionality where you can share your private reports. hope this helps

Thanks a million for your help NtrOP, Serbtastic and Accessdabbler. I renamed hosts.sam to hosts and the problem was resolved

I have a simple routed IP network made up of several lans. My win98 machines will not ping outside of their own subnet when using a machine name but will ping if I use the IP address. The win98 machines will ping inside the subnet using host names. Other machines e.g XP W2k will ping outside...

Please help. I have a DELL Dimension PC with a 'mdp3900v-w' modem. (PCI) Not sure who manufacturer is but it has a 'conexant' driver. When the modem is plugged into the wall socket it renders any other phones in the house without dialtone (even when the modem is not in use) Have tried another...

I have a very simple config on an accelar 1200. two port based vlans, IP addresses assigned at a VLAN level i have a bps2000 with two vlans configured on it, and two corresponding uplinks to the two vlans configured on the accelar IP forwarding is turned on all I want is simple routing...