Search results for query: *

You have both of the hard drives set as master? One should be set as master and the other one as slave. Or have them set to Cable select.

which 5700 do you have? The 5700N, 5700T or 5700nl? There is a bios upgrade, which they call a rompaq for the 5700N that recognizes drives over 30GB.

Make sure everything is seated properly. Not just the memory. Something else might be loose.

Glad you got it working! YOu must not have uninstalled the old drivers before installing the SB. And that was causing the problem. I've had that happen before.

Did you do a clean install when you installed Win2000 or did you upgrade it over Win98? Also,I looked on HP's website and it has nothing about using Win2000 with that model. So there's no help there.

Hi Jabez, why don't you tell us a little more about the computer? The model number and what the processor is. To help troubleshoot. As for the Ethernet card, that is the network card. You use it to connect to other computers. Or to go online via DSL or Broadband. Once you tell me more...

Jabez, try changing the IRQ for the video card. That might be part of the problem. I don't know if you can do it by going into it's device manager. It may not let you do it manually. One way to do it is to move the sound card to another slot. You'd want to uninstall the drivers first and...

Fenix, he is looking under device manager. Those are all the drivers for the hardware. The computer I use has a SB and those are the same things listed. Jabez, did you uninstall the drivers for the old soundcard before you installed the new one? That is probably why you have the question...

Hi Jabez. As was pointed out by Fenix, the onboard sound is something that is built onto the motherboard. Since your computer had a sound card in it you probably don't have onboard sound. Was the other sound card in there when you bought it? If so then it is unlikely that there is onboard...

The screen goes blank before ever getting into the operating system. So starting it in safe mode doesn't help. It goes blank during the post. And if I turn the monitor off and then back on I see what's on the screen for a second or two before it goes blank again. I'm sure it's a problem with...

Hi all. I have a KDS Visual Sensations monitor that is acting strange. If the computer is off the monitor will say that it is not getting a signal. The message will stay there until the computer is turned on. Which is what is supposed to do. However, when I turn on the computer the monitor...

they appear to be microstar motherboards The ms-6323 has this for memory PC100/133 3.3v SDRAM two 168-pin unbuffered DIMM Support a maximum memory size of 2GB (32M x 8) Support ECC (1-bit Error Code Correct) function. I'm sorry I don't have time to find the info on the other one. Just go...

Is there an option in the bios to enable the onboard sound? It could be set to disable. What kind of packard bell is it? Did you check the web site to see if they have information about the built in sound?

smaxted, you say that fdisk said drive letter changed after it was finish. Did it say what the drive letter was? Perhaps the c: drive was changed to another letter. Did you run fdisk and type 4 to display partition information? Does it show both hard drives? And does it say one of them has a...