Search results for query: *

Sorry I didn't add a proper subject in the first message...so here it is again with an appropriate subject: I have a SCSI hardware raid card (mylex acceleraid 170). I created 11 partitions on my disk (don't ask why) and my system only seems to have 7 devices associated with the disk (that is...

I have a SCSI hardware raid card (mylex acceleraid 170). I created 11 partitions on my disk (don't ask why) and my system only seems to have 7 devices associated with the disk (that is /dev/rd/c0d0p1, /dev/rd/c0d0p2, /dev/rd/c0d0p3.../dev/rd/c0d0p7) How do I get /dev/rd/c0d0p8, /dev/rd/c0d0p9 10...

I have an Aptiva 2170 MB (803)(win 98) with an Sis 530 onboard video card that saps its memory directly from the system memory...Currently the setting is 8M, I would like it to be more(16 at least), but can't figure it out. I have upgraded the bios, because thats where the setting for mem is...

Well, I used the newaliases command and that yielded this error... WARNING: local host name (MYHOST) is not qualified; fix $j in config file WARNING: writable directory /var I must assume that this is the root of the problem...thanks for the help. Any tips on setting up aliases?

Well here it is...I went through the steps to configure my sendmail too...you guessed it...send mail. Good news is it worked, Bad news is it waits exactly one minute before sending...I have it set up to go through a router, but I believe it is trying to use itself first then times out and uses...