Search results for query: *

Hi I thing you need to assign virtual extension licens to the generic: extension –c –d x --virtual yes

Hi LZY2035101/1/R1A LZY20351 BC 9 01 Standard application and accorfing to the Identity it seems to be in version CNI 81

It's BC 9 with Application system - Standard

Hi, ADD INFO 1 contains the relevant fault code. Here it's 782 which is an external source alarm, so at the ALU input 1-x-xx-x there must be an entry which is short-circuited.

use PNR - it's simpel and it's working !

SUDIP:LIM=x; print out all data for directory numbers stated in parameter LIM - but it gives much print!

please post route and dest from both jeddah and dammam: RODAP:ROU= ; ROCAP:ROU= ; RODDP:DEST= ; RODDP:DEST= ,IPOPT=YES; ROEDP:ROU= ,TRU=ALL; RIANP:ROU= ; RINIP:LIM=ALL;

The type of signaling used: ESPA or ? And please specified the signaling protocol: dialtone, meet-me, speech etc.

sorry for my late respons ! a short/brief description: 1. assign a common oacc with nansi:numtyp oc/od and opcoi NB! you can only have one coacc in the exchange, in your case 44444. 2. assign some "dummy" oacc (just for routing purchase) with nansi:numtyp oc/od and opcts:corg=x,oacc="first...

just a suggestion: make 44444 as a coacc and then use cust and empty corg with rernum to the difference b numbers.

Hi' Call-back, the MX-one is using Generic protocol and the MD use the Proprietary protocol (RODDI ADC d17) according to your data - here you shall use the same protocol at both. PNR, here it could be the SRT in dest 6999 that is wrong - the SRT in RODDI for PNR calls refer to the ENTRY from PNR...

opiss:dir= ,extend= ;

Hi´ have you try fast extending - EXTEND=E or F ?

Hi, you can do this by DISA with: *75* regional authorization code * free-seat number # - new dialtone - #11* free-seat number # Assign a regional authorization code: AUCOI:DIR=free-seat number,AUTH= ,CILCOD= ,CAT= ; To allow DISA with regional authorization code: ASPAC:PARNUM=184,PARVAL=1...

d1, d2, ... d10 when d5 = 0 blocked for traffic from public exchange (DID traffic). If you also want to block transferred public line, then look at ASPAP 67 and ADC d7 (ananlog extension).

Hi' "How to block incoming call in a analogic extension?" if incoming call is from a DID, then you can use the SERV d5 (for analog extension) to block.

to be sure, could you post: RODAP, ROCAP and relevant RODDP and ASPAP:PARNUM=223;

Try adc d5=0 in RODDI, Nortell don't supported Aastra UUIx. The same with vari d2 and d3 =00 - no UUIx. adc d25 should be set to 1 - Call back/call compl. as Generic. adc d13 = 1 sending TCM to a Nortell ?? Another important value is AS PARNUM 223 which should be 7.

Hi in site 1 you have assigned a local route id - ROU98, but when calling from site 2 there is no remote route id ! Try in site 1: RIANC:ROU=98,LROUID=""; or assign RROUID="ROU98" in site 2.

SEL d2=0 internal calls towards the group shall NOT be queued !