Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. fboucher

    Cloning Mermail Drive

    You can do a SCSI disk clone with Linux. Install the hard disk onto a PC with a SCSI interface to hook it up, and then use the dd (Disk Dump) utility to have the disk entirely copied. Lets say your source scsi disk is identified as /dev/sdb. You have two choices: 1) copy the entire disk onto a...
  2. fboucher

    Connecting a Ericsson webswitch 100 to a M1 analog

    I got the answer to my problem: As this is defined as an outgoing trunk route, the Meridian will block the output of any audio until the user dials a least one DTMF digit. it then wait 15 seconds for the other digits, then timeouts and hangup. To work, the user MUST dial at least 3 digits...
  3. fboucher

    Connecting a Ericsson webswitch 100 to a M1 analog

    Hmmm, I'm afraid this can't be it! In this test setup, the two webswitches are connected on a 10baseT hub. Not even a switch! Thus, this eliminates any suspected router problem. I think the problem is on the Meridian side, because I don't get any audio out when I tap the wiring between the M1...
  4. fboucher

    Connecting a Ericsson webswitch 100 to a M1 analog

    I am trying to use two Ericsson VoIP gateway (Webswitch 100) to replace tie lines between a M1 PBX and a Hitachi PBX. On the test setup, I can place an incoming call to the M1 through the VoIP gateway. This works fine. The call comes in through the M1 route 6, which forward it to the...

Part and Inventory Search

Back
Top