Search results for query: *

Thanks for the tips on the phaser 740. I checked the imaging unit and eventually found some scratches that matched the exact position and shape of my problem printout. Looks like a new imaging unit. I suppose its a daft question to ask if you can get the parts or is it the full product...

I am all for distance learning since we have adopted it at our college. It has several advantages that benefit the students and staff and college funding. During a normal lesson, using an interactive whiteboard, you can actually call up the web site and conduct your pre-arranged lesson and add...

The printer I have is okay but for the top of the paper that has a multi-coloured smear. It comes in the same place each time. It is about 5mm and happens in three places, same patern, same colours. I have cleaned, checked for any deposits etc but to no avail Any help appreciated.

I have a phaser 740. Just sorted out a couple of problems. Really need the manual. Anyone know where to get it in UK? Seen the entry about ebay. No luck there.

I have the same problem as above. I found the sensor board over to the left in the same compartment as the paper tray, the only problem was that it was smashed due to the paper tray being jammed in many times. I tried to source one with no luck. I took the board out and all it had is three push...

Just had a look at the original message. The first question I would ask is how have you connected the drives and CD's. One drive to be master, then one CD as a slave to it. Not Two CD's together since if you copy a CD for example then the data is on the same cable for read and write. Another...

When you go to print and then properties, you should be able to select the correct tray from there. If the wrong tray is selected then the printer will ask if it can use the other tray.

You say that it only works when it is a single drive. Since there should be two IDE slots on the motherboard, have you tried connecting a second hard drive onto the other IDE slot. Then on start-up, scan for hard drives and see if it recognises the second hard drive. If this does work, then copy...

With reference to the paper seperator on 5L's and 6L's. A little idea is to carefully remove the seperator from its position, it seems to be in there with double sided tape. Clean the bottom end with IPA. Then stick it back in upside down because you are now using new end. It has worked for me...

an Epson Stylus pro which I cleaned up because it was refusing to print. I discovered the battery at the rear which is a CR 2032. This was down to one volt. I changed that and now it refuses to start up and give the "data" light flashing. I have found no reference to this battery...