Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. imsnet

    HSRP

    Thanks Jeter, I actually found out you could NOT do HSRP on two interfaces in different networks from three different resources. (2 from Cisco). Your example was very helpful... Mark
  2. imsnet

    HSRP

    Can you setup HSRP on two routers with ethernet interfaces on different subnets? Example: E0 on router 1 - 192.168.2.1 E0 on router 2 - 192.168.10.1 HSRP address 192.168.25.254
  3. imsnet

    setup cisco lab environment

    Can you setup HSRP on two routers with ethernet interfaces on different subnets? Example: E0 on router 1 - 192.168.2.1 E0 on router 2 - 192.168.10.1 HSRP address 192.168.25.254
  4. imsnet

    setup cisco lab environment

    I did this on both routers. Is it correct? (Ip address is different) interface Serial0/0 no ip address no ip directed-broadcast encapsulation frame-relay no ip route-cache no ip mroute-cache no keepalive no fair-queue ! interface Serial0/0.1 point-to-point ip address 10.10.10.2...
  5. imsnet

    setup cisco lab environment

    How do I setup a cisco back to back lab environment I have two 2600's one with a external DSU and on with an internal? 1)How do I pin out a TP (with RJ45 jacks) to each DSU 2)How do I configure both routers Thanks
  6. imsnet

    default-route command vs ip route

    what is the difference between a default-route and ip route 0.0.0.0 0.0.0.0 e0

Part and Inventory Search

Back
Top