Search results for query: *

Woohoo Solved the problem.... I set my lan ip at home to 192.168.2.* and now i can ping and browse whatever on the vpn. I will need to bring this up with my checkpoint admins and ask why the 192.168.10.* range doesnt work. Thanks again for the help on this.

well i dont have access to the firewall logs but my secure client diagnostics shows lots ot accepted outgoing packets and all the incoming packets are dropped/denied

no completely different home = 192.168.10.* office = 10.44.2.*

Hi At work i have recently been given an account to logon to the company VPN. I have installed CheckPoint Secure Client with a pre setup policy. I can connect to the VPN with no problems but once connected i can't ping any of the PCs at my office. Im using a SMC 7008 router at home and...

Yea im sure When i connect to the different network at my office i can ping pcs over the vpn with no problems. I also cant connect to any mapped network drives or print to any printers in my office.

Hi At work i have recently been given an account to logon to the company VPN. I have installed CheckPoint Secure Client with a pre setup policy. I can connect to the VPN with no problems but once connected i can't ping any of the PCs at my office. Im using a SMC 7008 router at home and...

No the system doesnt have any antivirus software installed. The system has been formated and had a clean install and this problem persists.... thanks for the suggestion though

Multi SCSI CD-R Burning Problems Burner PC Specs --------------- CPU: Duron 900Mhz Motherboard: ASUS A7V8X-MX Ram: 768Mb 266Mhz Generic Ram HDs: 2x60Gb Seagate Graphics Card: Built-in Kick-ass beast! Sound Card: Built-in again Network Card: 10/100Mbit SCSI Card: Adaptec AHA-2930CU Adaptec...

no sorry i forgot to mention that i have only one FVS318 at my office and am using soft remote client on a windows xp boz to connect.

I now have VPN successfully working using soft remote client but there are a few small things i still need cleared up. When i create the VPN accounts on the router i have the set the IPSEC Identifiers to 0.0.0.0 to get it to work. It also doesnt matter what i set the Connection Name to because...

hey govcon That info sounds like it will be really helpful to me at least. I have been struggling with this for ages and cant ping the routers net address from the client. Im sure this will be the problem. I'll give it a go when i get home tonight after work :) Thanks

Hey NBAbueg... Sounds like you go quite far by calling Netgear. I still stuck at the Phase 2 stage, it just says "None". Any chance you could post some screenshots of your VPN settings at both ends as it may help a lot of people on this board. Thanks

Im still no further forward with my vpn setup. This is my VPN logs so far. Wed, 08/20/2003 10:24:33 - FVS318 IPsec:Receive Packet address:0x1806edc from 82.41.170.0 Wed, 08/20/2003 10:24:33 - FVS318 IKE:[Obvious] RX << XCHG_INFO : 82.41.170.0 Wed, 08/20/2003 10:24:35 - FVS318 IPsec:event after...

Thanks for replying Darren 1. When i ping the internet ip i get ping timeout 2. The lan ip address of the router is 192.168.0.0 and the lan ip of remote pc network is 1192.168.0.0. So wouldnt this cause a conflict. Should i change the lan ip adress of my remote pc to say 192.168.1.0 ? 3...

what enteries should i add to the hosts and lmhosts files ? the ip im trying to connect to is 62.xx.xx.163 and its workgroup is Obvious-Tech

i can sussecfully make a connection as the vpn status shows an established connection. But i cant ping the ip of the router or the remote pc after the connection is established. Ping just times out. Does that indicate that something isnt setup correctly ?

here are my logs from my FVS318.... Wed, 07/23/2003 20:28:08 - FVS318 IPsec:Enter Process_DeleteSA() spi_len=16 Wed, 07/23/2003 20:28:08 - FVS318 IKE:RX << DELETE ISAKMP SA : 80.195.61.105 ,I-R=3f 7 2c 87 6e 0 0 0 e2 32 c3 f3 48 c2 7a a3 Wed, 07/23/2003 20:28:08 - FVS318 IKE:[Dez Home] ISAKMP...

can someone please send me an updated version of the docs ? i have been using the w2k tutorial supplied by netgear but get nowhere and need help. rdoyle@obvious-solutions.com Thanks