Hello All
Could you help me know the steps involved in installing new annoucements in the Def Audix.
I have the new announcement on the tape.
Any help is very much appreciated
Regards
Nixon
Could anyone help me wiht the quries please.Which is the correct answer out of the 4 for each query. All help us much appreicated
nslookup receive *** can't find server name for address 127.0.0.1:unsepcified error
1.name server unreachable
2.Loopback adapter not installed
3.DNS not...
Could anyone help me wiht the quries please.
nslookup receive *** can't find server name for address 127.0.0.1:unsepcified error
1.name server unreachable
2.Loopback adapter not installed
3.DNS not confiugred
4.Server not configured for tcp/ip connections...
Hello all
IP sofphone unable to make phone call.
Taces are
1:59:49 active station 47803 cid 0x249
11:59:49 denial event 1644: Orig block/invalid digits D1=0x901fe D2=0x24a
11:59:49 active service-link cid 0x24a
11:59:59 denial event 1712: Ofhk alrt tmo intvl admin...
Hello All
Tricky situation.
1.Switch A connected to Switch B via IP trunks.
2.As the IP trunks needs to be monitored a loop-back trunk is in place
3.ars calls like 03437 needs to be goin via the loop-back trunk then fall onto the IP trunks and transverse onto switch b.
4.Als Switch B needs an...
Hello All
What is the impact, if any, if a change is made to the reporting week via 'Storage Intervals' in CMS Supervisor?
from 'Sun - Sat' to 'Mon - Sun' but before I do anything I wanted to know if there is an optimal time to make the change.
What steps I need to follow and would there be...
Hello all
Need help
System S8300 runing ACM 1.3 latest patch 6111
G700 mgp fw 20.13
When ever the system is shutdown we tend to loose the recent recorded announcements,
We need to the ftp the announcemtns again and it works fine
Cant find any known issues on website
Any help is much...
Hello All
We have 1 line wallboard connected to the BCMS Vu server and sometimes the WB shows an intermittent wandering 0 .
Any idea on this
BCMS Vu server R2V2
Any idea on this
Regards
Nixon
Hello
Looks like you integration is correct.
Please match the exact names as in Definity and Intuity.
If problem still exist try puttin and name and extension in the Audix
e.g. Ch sub 4444 = the name field should read as Nixon 4444
See how go on this
regards
nixon
Hello All
how do we set up the CDR on the IP 600
have done the setting on the node-names ip the CDR machines name
However in the ch ip-services i m not able to see the machine name.
Any idea hw do we set up
Regards
nixon
Hello All
Got a G3r v6 system and having problem re the SNI-PEER alarms. These are all resolved alarms
01E02 SNI-PEER 2561 8 01/27/13:08 01/27/13:08 1 0 1 r y
01E03 SNI-PEER 2561 8 01/27/13:08 01/27/13:08 1 0 1 r y
01E05 SNI-PEER 2561 8 01/27/13:12 01/27/13:12 1 0 1 r y
01E19...
System G3si R11.03.3.538.0
Extension type 4610.
Not able to dial the digits if get into the IVR or any telebanking application
Works from the digital handset
changed the terminal paramanet to suit Australia
any idea
nixon
Hi all
system ver G3R 8.03 simplex Port network
curenlt having a mss error and cant see the disk and the rmedia.not able to the save trans disk and the rem media
can i busy host adap and remove the remdia drive and disk on line..(its simplex only)
any idea how to resolve this issue
nixon
Hi All
duplicated system Si...V11.
when the system intercahanges ans is active on the "A" carrier then the time resets back to JAN 2000.
replaced processor netcon no luck
nay idea on this?
nixon
Hi All
Incoming call is presented in 02-1234-1234 format how can i get rid of the "-" in between
Any setting can help. Or is this a carrier issue
Outgoing is fine
cheers
nixon
Hi all
How do u increase the NICE query licence?.
The NICE dist told to increase on the NICE CLS on the microsoft control panle.
Could some guide me on that
cheers
Nix
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.