Search results for query: *

OK. I have seen this error before several times on different sites. Have you actually tried what I suggested? Remove the tapes that do not have barcodes on them and try to run an inventory. This will confirm if the problem is what I think it is. MrP

If your library is equiped with a barcode reader then you will need a barcode on every tape. MrP

That is you problem then. Netbackup can deal with tapes with no barcode if they are in a blind library. If the library has a reader then it expects every piece of media to have a barcode. Remove the media without barcodes and try again. MrP

Do you have any media in it? Remove and tapes and try again. If it works check the media you have removed and make sure they all have bar codes and that none of the bar codes are unreadable. It might sound strange but if you have media with no or unreadable barcodes in a library that has a bar...

Hi all, Does anyone have a script to generate reports on jobs that were scheduled but have not run? MrP

Hi all, Master server running RH AS3. Netbackup 5.0 is installed. According to the matrix this version is not supported, it needs to be 5.1. I have searched the Veritas site and cannot find any info about upgrading from 5.0 to 5.1. Does anyone have any ideas? Is it a MP install (if so which...

Hi all Got a strange problem. Have 4.5 installed on a Solaris box. When I do a test restore of a 1k file on a W2K client server it takes minutes. When I try the same test with a Solaris client it take nearly 2 hours. Has anyone come accross this? MrP

I don't think there is any problem with your config. Having an integrated controller looking after internal disks and a pci controller handling external disks. This isn't quite what you have but the point I am making is 2 controllers in a system is not uncommon. If you are happy with the slower...

It is fairly easy once you get the hang of it. If you have installed the HP RDP pack you will already have all the scripts you need for the unattended installs. If you can't work it out yourself, it is a bit convoluted at first, you can actually download the manuals from the HP site. There is...

Hi all My gf is having a strange problem with Yahoo mail. When she tries to logon to yahoo mail either nothing happens or after a long time she gets a server not found type error. Now for the strange part (I think) She can log into the general yahoo site and look at her calender and address...

Hi there Is it possible to configure nb4.5 to use a single port? Has anyone tried it? It seems to me that there should be a massive bottle neck. Any comments appreciated. MrP

Hi all I am getting the following errors. I have no idea what the "could not reset the access time of blah" does anyone know? I think that this one "TRV - /OracleAppFiles is in a different file system from /." is not important. I have /OracleAppFiles as a listing in the...

I had the same problem on a 380g2 after a reboot (a bdc) I just ended up rebuilding it. After it was rebuilt and replication with the pdc had completed the customer rebooted the pdc. It failed with the same problem...not a good day. Before the rebuild the customer needed some data off one of the...

Typically compaqs will run processors at different speeds, though it is best if they are the same speed. More important is the cache size and stepping. The cache on both chips must be identical and the stepping must be within 2.