Search results for query: *

We do something simular with a FAX server. We have two TIE lines that run from the Opt 81 to a Genicom FAX server. We chose an ACD that NCFW's to a DSC. The idea was to allow for a quick reroute change in the event of an internal FAX server failure. How is that 5 digit # configured now?

I found what I need Thanks

Anyone run into this? I dial Translation Pattern 741.1xxx and it changes into a Called Party Transformation Mask of 9011..... That matches RP 9.011! It works...it just takes 20 - 25 seconds. I add a # to the CPTM and it matches RP 9.011!# Same results. 20 of the 25 seconds the TP sits in the...

should be an IEEE MAC address

DAMN YOU QSIG!! That seems to come up more than I like. The Octel and Opt 81 are connected with 5 MWI ports. 25 pr off Octel to frame. 2616 configed w/MIC-MCK crosswired from 81c to the amp. Once MWI hits OPT 81 we PRI it to a Cisco 3700. RCAP is MWI & ND2

I have an Aria 250 with 2616 DMID attached to an OPT 81c Succ3.0. I send MWI to remotes over leased PRI voice - NO PROBLEM. I am now trying to send MWI over an IP T1 DCH. When I leave a message in a box - no light. When I MIC/MCK NO PROBLEM. What would be different between Octel using the...

Thanks for the suggestion. I'll give it a shot.

Is there a way to have the i2050 app "Pop-up" over other screens when a call is presented? I have come to ignore my tool tray and I take my headphones off occasionally. Thanks.

Ken, thanks for getting me looking in the right direction. As soon as I set the Reflections port to match the CTS port (3100)BINGO! Screen paint. Happy Holidays

Reflec term type = WYSE50+ TCP Port 23 CTS term settings: wyse50 24x80 9600 cs8 sb1 none clocal -cremote -rtscts

Alright, what am I missing? I have Reflections session to a Blackbox Compact Teminal Server and my ASYNC ports Active & Stored as SMT. I get a prompt from the CTS but nothing from the Octel. I can go to PING utilities in the Octel and ping the CTS. Why won't they talk? Thanks.

I have just upgraded to 2.10. Think this patch still applies?

I just aquired a new location with an Opt 11c. Right now SEB is my only access. I was able to retrieve Station Data and Update System Data. I can not get the ESN Wizard to connect and retrieve. I have monkeyed with the modem script but no luck. Who has mastered this problem oh wise and powerful...

Have you tried the On line CDR for the problem boxes? Menu 20, 13, 2 Put in a date range and the mailbox number and print out the message detail.

What are the errors are you getting?

Group Call Pickup allows you to cross PUG's Directed Call Pickup allows you to P/U a ringing DN if you know which DN is ringing. If you have two clusters that are two different groups (100 & 101) and you hear a ringing phone in the other group, but do not know the ringing DN, you use the GCP key...

if SPRE = 1, zz cannot be 1, 10, 11...19.

Try and make the new phone member 4 and see if it takes

In the Octel, check if you have Pkg 44 Networking.If you do have it here is a work around we use with the same Equiptment (an Option81C and an Octel Aria250 vmail). Set up a Node that is YOUR system. (I can help w/that if you need it) Then in the USERS (1234) mailbox at the "FORWARDING...

*** Into about the script ****** the scripts listed below are used to sync the time of the main pbx and the pbx in remote offices. all of the meridian switch are connected to the IP network. the script runs on a win2k pc that is time sync to the internet time source (ntp). time sync is done...