Search results for query: *

Not sure if this could be your problem but, if you look at the sample code you posted in your original message you had authentication spelled wrong. This is what you posted vpdn group l2tpipsec client authentification local notice the spelling error - I copied your config when I first started...

I took a look at the command references for IOS 6.2 and 6.3. It doesnt look to me that the command has changed 6.2 Command Reference http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#1026716 6.3 Command Reference...

I got it to work, my problem was with one of the ACLs here is my full config (pix 501 version 6.3) : Saved : Written by enable_15 at 21:39:08.573 UTC Sat Apr 26 2003 PIX Version 6.3(1) interface ethernet0 10baset interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1...

I've got some additional info. It seems theis is a NAT\ACL problem. When trying to ping across the tunnel I get #305005 messages in syslog. This info is from Cisco http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/63syslog/pixemsgs.htm#1054511 305005 Error Message...

I modified your config a little and tried it, my win2k client will connect and create the tunnel but I cannot get any traffic to flow between. Using ipsecmon (windows) shows an active connection. output from sh crypto map: ######################################################### Crypto Map...