Search results for query: *

Be aware that to run 100 Mbps full or half duplex always use the best possible cable testers to determine that your end to end connection would truly support 100 MBps. I have seen a multitude of the problems described and because of wiring somwhere in the link they hang or try to renegotiate, my...

Wybnormal has pointed you in the right direction. I support a site with more than 40 -5500 and 6500 series. I will give you our config. Our user ports are configured with port fast enabled, uplinkfast is disabled on all connections including inter-switch links. Portfast is disabled on all...

More than likely it's a protocol or advertisment misconfigured. Quickest way is to put a Sniffer or Fluke tester etc. and see who is top talker.

Have you done a" show proccess cpu" on this RTR. I have seen a MSFC RTR in a Cisco 6500 get an SNMP engine ID on it's own after I turned on Informs. This caused my router to approach 99% usage because the SNMP process was using availabe bandwidth and walking all tables. It would not...

TRy using sub-interfaces 4/0.1 and 4/0.2

Without knowing your box, I can tell you most of these boxes have a setting to filter on Ip addresses, but you will have to disable DHCP if you are using it. You can also write extended access-list to filter on HTTP, PORT #'s , specific IP addresses. Just remember if you put deny statements...

If you do not use WEP(wired equivalent privacy) for encryption on wireless lans, which will currently limit your bandwidth to 2Mbps and you want the 5Mbps-11Mbps bandwidth use a unique SSID on ACCESS POINTS and CLIENTS. Do remember if you leave the setting on access points"Broadcast SSID...