Search results for query: *

I have configured a Cisco ASA appliance, with IAS/Radius authentication, and can successfully login and browse the network, plus see the URL and FileShare list as defined in the policy group in the ASA. All seems to work fine - except: the webserver (setup for windows authenticated...

After much pulling of hair and gnashing of teeth, and WITH the aid of something called initiative and the use of personal gear and resources to recreate the problem in a lab environment, we were able to come up with a workaround to the problem of a Domain login NOT working over a Cisco...

I have moved 2 steps forward and 1 step back. I changed checked 'NetBIOS of TCP/IP' to disabled on the workstation, and guess wot!? I successfully authenticated to the domain! Amazing I thought. Anyway, as is always required a reboot was requested, and subsequently, the PC 'hangs' on 'applying...

I have a successful router to router (Cisco) IPSEC VPN working, DHCP works at remote branch, DNS and WINs are both working (Wins clients at remote branch are registered on WINs server, and in DNS server). I can ping across the VPN between internal networks successfully. When I try to login to...

I suggest you download and install Cisco's SDM, Security Device Manager software. This is TFTP'ed to the flash on the router alongside the IOS image. You can then configure the router using a fairly intuitive web interface (you need to install a Java plugin first on your PC, obtained from...

The command is actually dir flash: note the colon, but checkout this cisco url. You may have to use xmodem to download the image via the console cable if it's really been erased. You are currently in boot mode...

SeanWest, People are getting too carried away, although the reasons are all valid. Look at the basics. Note the ports that are set to 10MB speed, they are also set to full duplex. 10MB/Full duplex is not a standard. Although 100MB/Full duplex is. 10MB/Full duplex will work between Cisco devices...