Search results for query: *

Sounds bad. you say you can see your files on drive one (C:) with a floppy boot. If you can copy any data info files you need to another drive you can then try a reinstall of the operating system. I suspect you may have to reformat and do a clean install. Sorry I can not be more helpfull but not...

Try removing the 3rd hard drive in windows system properies. Reboot and the proper hard drive should be found by the operating system. Go to start/Right click on My computer/Click on properies/Click on hardware tab/ click on device manager/click on the disk drive tab + sign or double click to...

I Have the same problem with an intel motherboard and two hard drives. For some reason the BIOS changes itself to boot from a non existant network boot. I have to go into the BIOS about once every two or three months and change first boot device (in the hard disk category) back to the hard drive...

I have finally resolved this problem. It seems my Parallel port setting got changed to ECP port and the brother printer only appears to work properly with a Bi Directional port setting. So simple and yet so frustrating.

[2thumbsup] Thanks! good info on this site.

Thank you for the info. Makes sense to me.

Is there a way to limit access to a site ( hosted on the ISP site ) useing a password to log on. This is in reference to free webspace provided by the ISP and I have no control over the actual access to the site. I would simply like to have a first page that prevents viewing of further pages...

796 Your message is a little skimpy on what you have done. If all you completed with maxblast was a 0 fill of the drives you will not have access as this wipes out everything including the master boot record. If this is the case then run maxblast once more and choose set up drive. Follow the...

I have used Ontrack easy recovery in a similar situation and succesfully recovered data. the file names may not be identical but are accesable. If your jobdepends on it the price of the recovery software is probably worth it. There are other options besides Ontrack. This is just the one I used.

Thank you. If it is a driver problem there is no solution as the only driver available for this printer is built into WinXP. The cable has been fine for a long time with win98 but may be the problem. Thanks for the reply.

I have a Brother HL1040 Laser Printer. I have an XP system set to hibernate automatically. When I bring the system back from hibernation the first time I attempt to print I get only a line or two of symbols and it wants to print multiple pages. Once I cancell the initial print job and clear the...