Search results for query: *

Yes the SIP registration port is set to 5080 on these switches. The default is 5060 but we have found that on COX cable networks Cox uses the 5060 port for their own equipment so they can block those ports. The switching aspects of these calls work. Each phone sees the correct information...

To All: I have all of the prescribed ports for the DSP resources on the secondary switch forwarded on the Secondary router. (The port range for the 2 DSP on the secondary are in the 20000 range, the DSPs on the primary are in the 10000 range). I placed a wireshark between the phone and lan and...

Hi, Here is our client's setup: Two offices in different cities with two SV8100s netlinked thru a VPN Tunnel. A number of remote offices that are connecting using IP phones(All DT700). Remotes are configured for NAT. Problem: The office with the secondary switch can call a remote office...

We have a client with a similar setup. We had to create VPN tunnels between each office. This allowed the voice traffic to reach the IP phones. Good Luck

I am trying to setup a Cisco 678 with a D-Link firewall behind it so that my client can use the D-Link for doing all his firewall configurations. The Cisco is running the most recent DMT image. The Cisco is setup as a DHCP client on the outside and DHCP server is disabled on the inside. I would...

Hi, I am trying to understand the differences or, at least, the proper usage for the SMTP connector vs. using the virtual SMTP server. Anyone have a suggestion for a good article. Ernie

I ended up solving this by creating an additional email account for external domain for each of the earthlink users and making it the primary account. Now Email is working fine.

Hello, I am hoping that someone can help me with this. I have a client with a Windows 2000 SBS. They have a registered internet Domain and the mail is being hosted by ValueWeb. I have configured the "Connector for POP3 Mailboxes" to check the shared account on the ValueWeb server and...

Thanks for your help

Can Paging on a CICS be setup to default to the Sets only?

Can this be programmed into a button?

This is probably extremly newbie but I need to know: One of my clients wants to see their CICS setup so that a person does not have to pickup the phone or hit Handsfree to answer an intercom call. The way she decribed it, the phone beeps twice in the handset, then the other station...

Final Result Replacing the Feature Card fixed the problem. System is up and running. Now I just need to figure out what I need to program on it

To update you, I did try the reset. Unit still failed. I found a friend who has a CICS and we swapped parts around to confirm that the Feature Card was bad. At first, his Feature Card in my KSU seemed to fail and my Feature Card in his KSU failed to so I figured that it was a total loss, but We...

My client's Norstar Plus Compact ICS is down. The Feature Card was pulled with power applied. All phones are just flashing arrows. I have removed and re-applied power numerous times but it is still dead to the world. I noted that in another thread, the user had to replace his KSU. Before I...