Search results for query: *

I have read the various articles on booting from a CD after downloading Solaris 10, but I still have a problem where after downloading 10 and burning onto a CD, my Ultra 10 (at Sol 8) does not find a boot file on the CD, and fails to boot. My method was: - download onto windows XP m/c (I don't...

Hi RMGBELGIUM Thanks for your prompt reply, although I have been a bit slow in replying to you. All of the necessary info is present and correct on the RS, including the hosts file. The NFS daemons are also running. I had suspected that the Windows server using Maestro was the culprit in that...

I am trying to set up two internal networks on an IBM 43P-150 using the intergrated ethernet port and an additional ethernet adapter. I am doing this for a small office network and access by the server in this office to an IT server on a different ip address, serving the data over Hummingbird...

Hi crimso, Thanks for that, but a ready installed disk was obtained and replaced the failing disk. A bit extreme maybe but it had the correct software and set up on it, and works. cheers!

Hi Skiddy, Well - it's not quite as old as an RT/6150 and AIX v2 - but nearly. Anyway, the way I used to approach an LED of 299 was as follows, or at least as far as I can remember, but you will need the bosboot install/maintenance diskettes, and unfortunately I don't have any these days...

When booting, an SGI Indigo repeats lots of error messages that say there are system files not available or not found. This appears to be due to "dirty" blocks and/or superblock. I have tried using the command "fsck /dev/root" in single user mode but this fails to run...

There was a 2Gb disk in each of the upper and lower positions in an Indigo2 system. I have replaced both with a single disk, ready built, but although this apparently worked in another Indigo2 system my SGI system does not boot. I get different messages determined by which location this disk...