Search results for query: *

I have a router that uses ISDN as a backup method. Currently it also has a defalut route pointing towards their firewall, however, in the event of a route from their hub site going down, dialer watch forms a connection using ISDN. The thing is, I wanted to use another default route to point all...

Traffic shaping can be applied. There tons of help available at Cisco.

The DLCI was the key. It now works well. Thanks to everyone for their help.

Your NOT wrong....but you were half right...Practice helped me as well.. Normskin.

Hi tbilan ..Yes you can.. BlackCisco#term no mon BlackCisco#term no monitor BlackCisco#sh u Line User Host(s) Idle Location * 0 con 0 idle 00:00:00 Interface User Mode Idle Peer Address...

I have two routers connected back to back. I have configured one router as a DTE device and the other as a DCE. I have frame-Relay switching enabled and the interface is Up Up. I created sub-interfaces on both routers and assigned an /29 IP address to both (in the same subnet) routers. The thing...

What message do you get when you try to download ? does it timeout..That message we be more useful .. Normskin.

Hi...I couldn't help interpreting your email as asking how you stopped mesage appearing on you console. The best to do that...without having to stop logging is :- Terminal no monitor. Even if messages are generated you shouldn't see them. Normskin..

Hi. Your setting are correct. If the laptop is a IBM, the problem is most likely to do with the COM port not having an IRQ available. What I would do first is try a different emulator. Experienced engineers rarely use Hyper Terminal. Something like secureCRT, which is available for free...

I have setup a test network with two Cisco 3640s. I have connected the serial ports directly together with a DTE to DCE cable. HDLC and PPP encapsulation work fine. However Frame-Relay does not work at all. The carrier transitions go up and the link remains UP DOWN. Is there something missing ...