Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ttm666

    Clock synchronization

    All, We have a lab setup which includes a Nortel Meridian and a Symposium 4.2. The configuration is setup such that the Meridian dictates the clock on the Symposium server. The rest of the lab hosts are configured to synchronize internal clocks to the Meridian server. My only concern with this...
  2. ttm666

    Redundancy

    All, We're porting a solution (CTI application) to multiple switches and are currently supporting 1. Avaya Definity 1 (CentreVu / Avaya CT) 2. Nortel Option 11 release 25 with Symposium 4.0/4.2 and CT-Connect 5.0/ Intel NetMerge 6.0 3. Cisco CallManager 3.3 We have programmed redundancy for...
  3. ttm666

    Symposium server redundancy/failover

    All, Does Nortel provide any failover redundancy options to their Symposium server? Is it possible to have two symposium servers connected to the same switch and have one them being in a "failover" mode such that it takes over if the primary falls out? Thanks, -- Thomas
  4. ttm666

    Trouble with CDR setup on Meridian 1 Option 11

    Colin, My address is ttm@onrelay.com. Thanx!! -- Thomas
  5. ttm666

    Trouble with CDR setup on Meridian 1 Option 11

    Thanks for all valuable input. I've now tried to add CDR to tty 1, just to see if I can get the CDRs on a pipe that I'm sure works. We use tty 1 for main administration (it's just a lab switch anyway). ADAN TTY 1 TTY_TYPE SDI CAB 00 CARD 00 PORT 1 DES main BPS 9600 BITL 8...
  6. ttm666

    Trouble with CDR setup on Meridian 1 Option 11

    From my previous posting it should be quite clear that baud rate 9600 and 8 N 1 are set: BPS 9600 BITL 8 STOP 1 I've restarted the hyperterminal without success. Thanks for advice of making sure to restart it, though. As far as I can see, CDRs are not enabled on individual trunks but on a...
  7. ttm666

    Trouble with CDR setup on Meridian 1 Option 11

    Thanks for you insight. The following is the output on TTY 2 from LD22: ADAN TTY 2 TTY_TYPE SDI CAB 00 CARD 00 PORT 2 DES CDR BPS 9600 BITL 8 STOP 1 PARY NONE FLOW NO USER CTY I've also disabled/enabled the port in LD37 (as suggested in a posting I found in...
  8. ttm666

    Trouble with CDR setup on Meridian 1 Option 11

    All, I'm struggling to set up CDR capturing on our Meridian 1 Option 11. I've followed the steps outlined on http://www.russellweb.co.uk/nortel/cdrsetup.asp without success. I'm using a DB9 -> DB9 null modem cable (on com1). A posting on this site suggests that the cable has to be a Nortel...

Part and Inventory Search

Back
Top