Search results for query: *

Here's my current firewall config: PIX Version 6.1(4) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password ########## encrypted passwd ########## encrypted hostname pixfirewall domain-name ciscopix.com fixup protocol ftp 21 fixup protocol http 80 fixup protocol...

I have successfully configured my PIX to do port forwarding for HTTP, FTP etc using the standard access-list/access-group/static commands... However, I’m having trouble getting forwarding to work on port 1720. I have a Cisco ATA 186 Sitting on the local network with the following IP Address...

I have a static IP assigned by my ADSL provider. My topology is as follows: Internet --> ADSL Modem/Router --> Cisco PIX 501 --> Local Area Network (192.168.1.X) ADSL Modem Interfaces Outside: 213.1XX.XX.XXX Inside: 192.168.0.1 Cisco PIX 501 Interfaces Outside: 192.168.0.2 Inside...

Everything is working now. Thanks iiiiss and br0ck. Now I've got the basic setup working I can spend time reading the books / forums and getting the rest of the setup complete. Once again thanks for all your help.

I've powercylced the PIX a few times but the situation remains the same. I can ping the PIX from the workstation, I can ping the ADSL modem (192.168.0.5) from the PIX, I can ping the outsite world (eg. 80.79.XX.XX) from the PIX but I can't browse the web from the workstation. I think we're...

I have applied the changes. I can ping the PIX(192.168.1.5) from the workstation(192.168.1.253), I can ping 192.168.0.5 from the PIX(192.168.1.5), but I can't ping 192.168.0.5 from the workstation and I can't surf the net. Here is my config file as it stands at the moment: PIX Version 6.1(4)...

Correction, I can ping 192.168.0.5 (me being stupid with the wiring for a moment...) from the firewall But I can't ping 192.168.0.5 from any of the workstations

I can't ping 192.168.0.5 How can I remove the 'name 192.168.0.0 Outside' line? I really appreciate your help on this, slowly it's all starting to mase sense.

Brock, Thanks for your advice, I've made the changes you have recomended, but I'm still not having any luck. NAT is disabled on the ADSL modem. I think it is enabled on the PIX, but I am not sure. I know my ADSL modem is configured correctly as I have this setup working with a Watchguard...

I have the following network set-up: http://www.urt1.com/network_d.gif The network is working fine and so is the ADSL (ZyXEL) modem, the only problem I have at the moment is getting the PIX to forward the packets to the ADSL modem. I have spent 2 days trying to find relevant chapters in the...