Well i thought i would post an update just in case anyone was interested.
Evidently the reason the my confusion over what performance to expect from a 4006 switch comes from the fact that there is a seperate hardware routing module available which routes extremely quick. As opposed to standard...
You could try using the command;
port block {unicast|multicast}
on the interface.. which prevents the switch from forwarding unknown packets onto the interface. Then you would have to define MAC address in the static arp cache i suppose..
just a suggestion perhaps worth trying, i have not...
Hi,
I have a Catalyst 4006 which (i was told) is meant to be quite quick in the routing stakes.. my experience has been to the contrary.
With just a couple of simple static routes (100MB LAN Segment to 100MB LAN Segment) and my (3x) backup servers routing through it i am getting CPU utilisation...
Hi,
I am looking summarise the log output of a PIX 500 (ver 5.3), no problems with getting the ouput to a syslog host, or running the perl script etc...
What i am having problems with is that most of the scripts i have looked at to perform this function do not appear to recognise the events i...
Unfortunately i came to the conclusion that you can not have a destination span port transmitting traffic.. so i ended up kludging something together with a hub for what i needed to do. Not pretty but it works.
cheers
joel
Hi..
I have a SPAN (monitor session command) configuration with two source ports (both TX/RX traffic) and one destination port.. this configuration works fine.
However what i need to be able to do is have the destination port host be able to transmit on that destination port (in order to...
Using snmptrap.exe (assuming you are talking about the MS version?) and kiwisyslog does receive the traps but it does Not decode the OID data, so i see the full OID number with it's value... What i want is to receive the TRAP, decode OID and post the resulting text and value into syslog...
Using snmptrap.exe (assuming you are talking about the MS version?) and kiwisyslog does receive the traps but it does Not decode the OID data, so i see the full OID number with it's value... What i want is to receive the TRAP, decode OID and post the resulting text and value into syslog...
Hi... i know this is not quite the right forum for this question but don't see where it may be better answered!!!
I am trying to track down some low cost (read freeware or shareware ;-) software (running on W2K) to receive SNMP traps from Cisco routers, switchs and misc server hardware.
Not...
Hi,
I am having a problem getting arcserve alert notification to work, what i am trying to do is have email alerts of backup failures.
However at the moment it ain't working! It fails with the error "Failed to send email (1314}".
I have the alert manager running under a service...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.