Search results for query: *

Hey guys, I have an ISDN BRI line w/ and Adtran Express 3000 modem at home for work purposes. I would like to somehow use an Cisco 7940 phone with it but I'm not sure what hardware I needed in between. Any ideas on a quick solution?? Thanks.

I'm assuming that you have ruled out any access-list issues here. If so, can you ping an address on the 2600 from one of the 1720's sourcing the ping from the ethernet address?? Do you see the 2600 when doing a 'show cdp neighbors' on one of the 1720's?? If the answer to both of these is...

Thanks Peter for the reply. My bad, I forgot to include the config of the major interface which does have the 'frame-relay traffic-shaping' command on there. The BUR_TO_RCC class is applied under the DLCI definition (frame-relay interface-dlci XXX). And actually, this should have an effect on...

Hey guys & gals, I posted the following topic on the Cisco discussion forums and have not yet heard a response so I will post it here. I have a question about Low-latency queuing. The following is configured on my branch routers to handle VoIP traffic. ! class-map match-all VOICE match ip...

Looks like you got this issue resolved but I read it and couldn't help but comment because we had the same issues!! Here's the link I used to fix my problems. http://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a0080093f1f.shtml

Thanks guys for your help!!!! -Lloyd

Hey guys, I am trying to setup a 2924 XL (IOS 12.0(5)WC9) with about 5 vlan's. Eventually I am going to connect one of the ethernet ports to a 7204 router to perform the one-arm routing. My issue is I can only have one vlan up at any time. All the other vlan's show as administratively down...

Hey folks, Does anyone have any experience with configuring an Aironet 340 Wireless Bridge (currently, we have 2 that bridge two wired networks) to use LEAP??? Right now, I am using WEP128 and it is being requested that we change to LEAP to increase security. Any help would be greatly...

Hi everyone, I have an issue in regards to connectivity between two SNA Servers. We currently have an SNA Server in house that services all the internal employees and has a connection to a mainframe offsite. We will soon have a vendor connect to that SNA Server using an SNA Server on their...

Thanks for the prompt response. In the configuration, I already has the "telnet timeout 1" command in there, yet I still do not have to login after a lengthy period of time. I put in the "telnet timeout 60" anyway with the same result. Does the telnet command apply only...

Fellow PIX Gurus, I have a PIX 515 w/ PIX software 5.3 on it. I can't seem to find a way to timeout the physical console on the PIX firewall. With my laptop plugged into the console port, I can go into configuration mode. If I disconnect my laptop, without exiting configuration mode, and...