Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
"Service failed to start" error in Event Viewer
Getting message: "The 3COM Serial Port Driver Service failed to start due to the following error. The system cannot find the file specified The server is a Dell Poweredge 6300 with an Intel NIC and a US Robotics Modem that is not currently being used. I have temporarily disabled the 3COM...- BigInjin
- Thread
- Replies: 2
- Forum: Microsoft: Windows servers
-
Need basic information on routers; configuration and operation
I have several years of experience with networking in general, but I don't have any experience or training with routers. Are there any internet sites where I can get some basic familiarity with router configuration and operation. I was recently hired as a Systems Administrator with the... -
Backup Exec 7.11 Job Mngr error "Device driver load was unsuccessful"
Netware 4.11 Server, mirrored SCSI drives, CDROM and Seagate STT8000N Tape Drive on a single Adaptec AHA2940 controller, running Backup Exec 7.11 was running okay, but the BE help files were missing which caused errors during server boot that had to be bypssed before the backup software would...- BigInjin
- Thread
- Replies: 2
- Forum: Data Recovery
-
Backup Exec 7.11 Job Mgr error "Device driver load was unsuccessful"
I have a Netware 4.11 Server with Adaptec 2940 SCSI controller and Seagate STT8000N Tape Drive. Running Backup Exec 7.11, but the help files were missing and caused errors that paused the boot process until you bypassed them. Reinstalled Backup Exec to fix the problem and...- BigInjin
- Thread
- Replies: 1
- Forum: O/S Other general discussion
