You need to purchase a SmartNet contract, and once your PIX is registered, you will have access to the downloadable files that you are looking for.
Thanks.
I am running 6.3.1 now.. I was using 6.2.2 for a while.
mtashiro, can you explain how you got this to work? Was it on a 501 box?
I still can't seem to get it to work...
The DNS is external.
The only difference is that to access this server from the outside, it is IP only and not by hostname.
The idea is that it is using DNAT (Destination NAT), but it doesn't seem to work.
I have a PIX 501 with a server on the inside that is accessible from the outside with the routable IPonly, using the static command;
static (inside,outside) <outside IP> 192.168.0.101 netmask 255.255.255.255 0 0
There are inside users that also need to access this internal server using the...
I'm looking to disable split tunnelling when there is a site-to-site tunnel between PIX's.
Is there a command that would not allow split tunnel? Or is it just a matter of applying an access-list on the inside to permit only VPN encrypted traffic to the hub site, and deny the rest?
I have a scenario whereby I'm using a router based VPN to terminate my site-to-site tunnels and my T1 connection.
I have a 3rd party partnernet that I need to connect to, and they have provided me with their own hardware to connect. I would like to continue to use my current T1 circuit, but I...
What is the meaning behind the "loggin facility" command?
Can anybody clarify?
Cisco says this:
"The single syslog daemon (syslogd) can be thought of as having multiple pipes. It uses the pipes to decide where to send incoming information based on the pipe on which the...
I have built my tunnel and I can even ping a host on the inside.
36: Outbound ICMP echo reply (len 32 id 2 seq 7425) 192.168.3.100 > 192.168.3.100 > 192.168.12.1
37: Inbound ICMP echo request (len 32 id 2 seq 7681) 192.168.12.1 > 192.168.3.100 > 192.168.3.100
38: Outbound ICMP echo reply...
As a recommendation of 'good security practice', turn off split-tunneling to prevent the general Internet from accessing the VPN back to the head location, if there was ever an intrusion.
Let's break this question up into three parts.
1. Can you use DES even though you've upgraded the license to 3DES? The answer is yes.
2. If I setting one side as esp-des and other side as 3DES, what happens? It won't be able to negotiate a common transformset. The key is to have a common...
Hi Yizar,
Sure, I use three basic fundamentals when I go to study.
For all my certs (CCNP, CCDP, CSS1) I read the Cisco Press cover to cover first.
Then I do the Boson exams (usually two sets) for each course. When I have the two sets I ALWAYS do all the questions in one shot (i.e. 200+...
I've done the CSS1 certification and as far as MCNS, I would highly recommend that you do it LAST.
MCNS covers all three topics covered in the IDS, CSPFA, CSVPN exams, but at a higher level in addition to some basic security concepts.
I did the MCNS last, and I absolutely killed the exam with...
Does the 6.21 code not need to have 32MB RAM?
The PIX 501 only ships with 16MB...
Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz
Flash E28F640J3 @ 0x3000000, 8MB
BIOS Flash E28F640J3 @ 0xfffd8000, 128KB
I've been hesitant to install 6.21 for that reason.
Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.