Search results for query: *

Hi, I have installed SMS 2003 sql 2000 on w2k server. What is the easiest way and the fastest way to distribute software update to a test system? All the help I get is appriciated. Tony

Thanks for the feed back, so I can save with no problem?

Hello all, Was wondering why I get this when I try to change the conf of my cisco 2500 router? When I try to wr mem I get this message Warning: Attempting to overwrite an NVRAM configuration previously written by a different version of the system image. Overwrite the previous NVRAM...

Hello all, How do I move the mail from netscape 7.1 from one system to another??? Any help will be great. -Tony

Hi, I am installing MRTG on a win 2K based system. Couple of questions? 1. I know the documentation says to Add the following to the top of the mrtg.cfg file: WorkDir: D:\InetPub\wwwroot\MRTG This is where the web pages are created, usually a web root However my inetpub\wwwroot dir is...

Folks, I have a question on the round-robin load balancing scheme on a Cisco Local Director 416, running IOS v. 4.2.5. I have set up 3 real machines: 10.13.1.82 10.13.1.83 10.13.1.140 Port 80 on all three are bound to port 80 on the virtual: 10.13.1.101 The load balancing scheme is...

Thanks all that did it. Not very secure if anyone can change the root paasword this easy? any way to lock this down? Once again thank you. Tony Banks

Lost root and user password anyone knows how to reset the password in redhat 9.0

Thanks Matt. Needed a couple of more tweaks but that did it. Tony Banks

cfgmaker --global 'WorkDir: /home/httpd/mrtg' --global 'Options[_]: bits,growright' --output /home/mrtg/cfg/mrtg.cfg community@router.abc.xyz This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your...

Yes I do. Actully got that part working now iam getting this error: [root@MRTG root]# /usr/local/mrtg-2.9.29/bin/mrtg /var/www/html/mrtg.cfg ----------------------------------------------------------------------- ERROR: Mrtg will most likely not work propperly when the environment...

I am using another router to test this darn program... I started debug on it and here is the error: lsystem.5.0 = 10.13.1.91 00:38:33: SNMP: authentication failure 00:38:33: SNMP: Packet sent via UDP to 10.13.1.91 00:38:35: SNMP: Packet received via UDP from 10.13.1.91 on Ethernet0 00:38:35...

Thanks for the info. I think my snmp is not working? here is the error I get: [root@MRTG bin]# ./cfgmaker --global 'WorkDir: /var/www/html/mrtg' --global 'Options[_]: bits,growright' --output /var/www/html/mrtg/mrtg.cfg --ifref=ip jetha@10.13.1.91 --base: Get Device Info on jetha@10.13.1.91...

Matt, After I try to run MRTG I get this error any idea? mrtgwill most likely not work propperly when the envireoment variable LANG is set to UTF-8. please run mrtg in an envireoment where this is not the case: I am almost there... Thank you for all your help. Tony Banks

Anyone out there knows how to install and configure MRTG under Linux 9.0. Your help is appriciated.

Thank you Laurie, It was not a driver issue. Needed to go to /etc/sysconfig/network-scripts and add another ifcfg-eth statement. Thankx Tony

Help??? I am trying to configure my linux 9 to be a firewall with three nic cards.. two PCI RealTek RTL8139 NIC's One ISA Linksys ether16 I am able to configure the two PCI with no problem, however It has been a pain trying to configure the third ISA card any idea anyone.

ModemDiag Description: Displays diagnostic information about each modem as the modem’s call is cleared. The command is a toggle that alternately enables and disables the diagnostic display. Usage: Enter modemdiag at the command prompt According to Lucent's Admin Guide using this command will...

Does anyone know how big the profile in netscape gets before it gets corrupted. (Outlook PST is 2gig) Thank you all, Tony

I am setting up a linux box so I can ssh into it in order to vnc to NT servers for administration. Now the linux box will be on the public domain and all the other servers are behind NAT router. I would like to secure the linux box as much as I can, how can I do that, and the linux box is only...