Search results for query: *

Installed Saber's Atx2001. I get runtime error 429 on start of program. I used regmon to analyze the start up registry calls and found certain keys not found. HKLM\software\microsoft\VBA\monitors HKCU\CLSID\{A85CFE24-A788-11D5-BD58-000102C2DCD2} " " &quot...

When adding a new drive to your system, it's good practice to format the drive as well as fdisk it. Fdisk, when used with the proper switches, ie. /mbr, /u, and /s, ensures maximum capacity as well as the opportunity to partition the drive as well, ( 40GB drive D to 10GB drive D and a logical 30...

Check the 110/220V switch on the back of the power supply.

First: CMOS (battery backed) setup values are chipset functions. They are not stored in the bios chip, be it EEPROM, EEROM, EARROM, or whatever. Second: BIOS is a prorammed chip separate to the chipset. It does allow access to the CMOS registers. Third: A No POST can be corrected with a BIOS...

The proper video adapter driver is necessary. You can obtain the driver with the following steps. 1. Identify the mfgr. Either printed on card, GPU (main chip on card), or documentation provided with pc. 2. If none of the above reveal mfgr, then look for an FCC-ID number, the first three...

Thermal considerations can relate to anything the manufacturer states, be it junction, case (chip), free air, or whatever. Dissipation is the key. The thermal velocity from the junction to the case and from the case to free air is what matters. Numbers in degrees C or F mean nothing unless they...

Asus made at least ten versions of the CUV4X. Which one do you have? And have you checked for for their latest BIOS upgrade? Let us in on both.

Check to see if your mouse driver "configuration file" is loaded at start-up. By pressing ctrl-alt-del after start-up, you will see a list of programs-modules loaded. Check for anything mouse related. If nothing, rerun your mouse config utility and look for any option that asserts...

I am attempting to use a p166 with two CNet C600e nics to network two other pcs with 3com elinkII 3c509b nics. I crossover between the nic pairs...pc2 3com to pc1 CNet and pc3 3com to pc1 CNet. I am not using a hub or switch. All machines are ME os and include tcp/ip, netbeui, and ipx bindings...