Search results for query: *

I have a access-list that allows any ICMP to come in. Which it works kinda. If I am doing a tracert for a DOS window it seems to make it there just fine but if I goto anothor router it does no it * out and says its alive. Any ideas? Thanks

I have a windows 2K server thats a DNS server and when the Firewall is on it does nothing. any ideas? I have many NT DNS servers and have no problems. Thanks Chad

If any of you are a host DSL provider for QWEST please let me know I have some questions. Thanks

I am getting this error on my 2k server under app any ideas? Thank you The Group Policy client-side extension Security was passed flags (17) and returned a failure status code of (1332). Security policies are propagated with warning. 0x534 : No mapping between account names and security IDs...

Here is my example for a access-list Router 3640 serial0/0 (internet port) serial1/1:0 (customer on a T1) Router 2610 serial 0/0 (going to router 3640 serial1/1:0 Router 3640 config interface Serial0/0 bandwidth 1536 no ip address encapsulation frame-relay IETF no ip route-cache no ip...

I am having such a hard time with this access-list here is what I am trying to do is I am trying to block all ports but Telnet to 2 diff hosts but I am trying to make it so that all traffice can go out of the Wan interface. I have done it before but for some reason its not working on this...

Thanks for the reply well I am looking at about 30 at one place and 20 at the other place. They are Windows computer at each location. There will be one main server at one location that all the computers in both locations need to be able to access. I am running TCP/IP and IP addressing is not a...

I am trying to net to of my building together so that they are only one network so the computers can see other computers at the other location. Is this a bridge option? if so whats the best way to do this. Thanks for all the help from you guys from before..

I have a 3640 with a T1 Wic card and a Baynetworks ARN router and I cant get the PPP to work. I set the MTU to 1500 on the Cisco. and on the Baynetworks I set the MTU to 1506 and the MRU to 1450 and still nothing. The Line is up but the Line Protocol is DOWN. any ideas Thanks

I have a 3640 with a T1 Wic card and a Baynetworks ARN router and I cant get the PPP to work. I set the MTU to 1500 on the Cisco. and on the Baynetworks I set the MTU to 1506 and the MRU to 1450 and still nothing. The Line is up but the Line Protocol is DOWN. any ideas Thanks