Search results for query: *

Updated patch from 3com and it is now working ok

RE: thread544-1043965 Thread 544 START "Dial on demand" and "Idle time" mean just what they say. The router will drop the Internet connection after the number of minutes of inactivity specified by "Idle time". To avoid this happening, set the time to 0. If you tick "Dial on demand", the router...

This machine has worked fine for a few years however in the last week or so it has been running unuseably slow. 30 mins to boot up, 5 mins opening small text documnets etc. There were no reasource hungry proccesses running and the disk is more than half empty. Occasionally it would freeze up...

We are using norton antivirus corp edition, setup so the server propogates the definitions to the clients. We have added a firewall and are trying to download definitions using the ftp.symantec.....etc however I cant find anywhere on the web what range of addresses I need to add to my FTP rule...

I have just set up a PC with SATA drives (directly from the motherboard. To set that up you firstly need to copy the SATA disk drivers to a floppy disk, when you install from the 6 xp disks, I think it is on disk one it says press f2 to add additional drivers - press F2, nothing obvious happens...

I have just upgraded to a new box with ASUS A7N8X Deluxe/XP pro – I was expecting plain sailing installing all the bits and bobs from my old PC (everyone raves on about how good XP drivers are etc). I firstly needed to replace the graphics card as the 3 year old one wasn’t AGP compatible. It is...

I am in the middle of installing a asus MOBO into a Eagletech skyhawk case - I have got to the point of connecting the case wires to the MOBO however the manual (for example the reset button) states all the wires have +/- so I am assuming there is a correct and incorrect way of plugging them in...

I was tring to log on to the server (I tried it with the server prefix but the same error occurred)I can log into the problem server with the same user account (using the windows login). I have tried other users to, with no joy. I think I will try bouncing the server and see if that clears the...

I have 2 4.11 SP9 Netware servers, I am trying to get a ghost image off one and it won't let me login via SYS\public\login\login.exe it just comes up with access denied. Password and user name are the same (obviously). If I try the same with the other server it logs on fine. If any one has...

It is a PS2 keyboard. I have cleaned the connectors, ensuring the pings weren't bent and the plug is inserted fully. After examining the pc again the lights on the key board light up on booting so there must be power, it is almost as if the pc cannot commmunicate with the keyboard though...

I have a PIII PC that boots up with a BIOS error - cannot find keyboard... and goes no further. I have tried several other keyboards which work on other machines but to no avail. I have not changed the setup for several months and before yesterday it seemed to be working well. I didnt think...

On our groupwise system satistics report there is a statment like: Problem 39 for userxxx.db no user to match it to. I am assuming as I managed to match the FID to a old user I deleted yesterday and the last changed dates for the other .db files is ages ago that they could be deleted?? I...

On several XP pro PC's now we have had a problem where on selecting shutdown (or logoff or restart or the power button, ....) a message box pops up saying "Windows is using a file please wait" with an OK option. Hit ok and it goes back to windows main desktop (There aren't any...

I went into the BIOS and changed some of the power settings to Disabled and it seems to have done the job thanks. Revvy

I have a PC (IBM netvista running XP) which has a palm sync device plugged into its serial port, on shutdown the PC restarts. If I disconnect the device from the serial port it shuts down fine - from reading other questions on the site I have set the PC not to auto restart on error, but no blue...

I have encountered the same problem, those files are also already there. Did you or does any one else have a solution for this problem? Regards

We have a laserjet 4 on our network which this morning suddenly stopped working. It was set up in Jet Admin (printer queues on a netware 4.11 server) and up to now has worked fine. If you send a job it just sits on the queue. From the printer itself I can print out test pages. I can still ping...

Tried UNC, IP Address, NT, 2000, still only seems to affect one user, it appears still to be fine from web browser but that is not ideal.

I cant get into the client at all to archive. The client options within NWADMIN only seem to change the options once your in groupwise, there is nothing mentioned for access to the software initally. I have even tried renameing another userxxx.db file but that displays a locked error. Any...

I have a user who all of a sudden cannot access his GroupWise client. Error:"Grpwise.exe has experienced a critical error - you need to restart." I have tried different machines and the only common link is the user. I have scanned the Novell site and it suggests the user database has...