Unless you change job and find something that is more focus on either Microsoft or networking. Either one will help you do your present job and may be helping you to find your future job.
Unless you are focus in one area, you are not going to be good in it. Your pick!
Functionally, they do the same job!
Administratively, you may not want people to touch the router to debug issues. If you have Windows admin in your office, I would give this task to the Windows admin to handle. If you have office that has no Windows Admin and you do everything - network and...
Are you saying next to the button 2 it is blank? Check extension line 2 and see if Line Text Label is filled with the correct information or it is blank.
Do you have a Fiber Optic Distribution Panel in the remote building? If you do then you need to find out what is the type of patch that is accepted at the patch panel. If it is 5 years and older, I think it is either a ST or SC then you need a patch cable to go from the panel to the switch. So...
MrHaha:
Good question. I always have another person at the other end to do the change at the remote site. However, if I have to do it with one person only. I would add the route first then change the IP address of the outside interface. I also would add your site's external IP as a allowable...
All:
I installed the identity cert with a new cert on the ASA5520. VPN clients with XP OS never complained about cert issue. Windows 7 complained about the cert has expired and do you wish to continue. I know the old cert expired and that's why I replaced it with a new cert. Then I removed the...
I am surprise no one give you any questions to ask your customers...I have the following:
- Have they demonstrate to you that the system can call every where that you normally call. For example: overseas call, domestic calls and 911 calls? They should have a check list to check passed or...
mitelinmyblood:
MOH has been haunting me for months. My issue is MOH volume is too loud. It is a 5 second job to adjust the volume for any PBX. With UCM, I need to re-import the wav file and adjust the input gain to a different level before I import the file. After I imported the file, the...
My suggestion is to create two layer 2 VLAN since they are two separate companies and not suppose to "touch" each other. I assume they have their own gateway. With layer 2 VLAN, you don't care about the VLAN #, you don't need to change the IP on both companies. You are merely using you switch...
itexperienceduser:
Enabled SplitTunnel with the VPN will allow the users connect to the company's network and at the same time be able to serve the web or other networks other than the company's network.
Disabled SplitTunnel will allow the users to VPN back to the company's network only. In...
I did not set up my system. My system shows internal caller ID(4 digits) and external caller ID(10 digits phone #). The caller ID is at the subject line.
preetss:
If I understand your question correctly, you have one main number to take message. This # is associated with a group mail box, your question is: How to make all subscribers in the group mail box to recieve the MWI on these members' phone?
You need to go to Unity and look under the...
whykap:
The pilot point send the call to voice mail already then back to the front desk during 8 to 5 Mon to Fri. Then it would play an after-hour greeting during off hours.
My question is: How do I change that to route to our 24x7 security desk after business hours instead of playing the...
Folks:
Our front desk is set up to route incoming calls after business hours to Unity for we are closed message. How do I change that to route to our 24x7 security desk after business hours? It was set up route to Unity by consultant years ago. Please give me some hint how to do it. Thanks!
KC
matt26uk:
Windows 7 has significantly different files permission scheme than Windows XP. I don't think you have VPN issues. I think you have permission issues with Windows 7.
KC
Just FYI!
I have two Plantronic bluetooth headsets and I paired them with my Windows 7 laptop several weeks ago. I tried to use either headset for the past sseveral days and I tried turn on and off the headset and I charged the battery etc. None worked except I removed the headset from the...
Isn't it ture that the rvision # would also be updated?
Why revision # is the key?
By looking at the revision # then you know that it has been updated - that's how I know the new version of VLAN is applied.
Folks:
I think there is one more important feature: when the switch is in server mode, if you add new VLAN to the server, the server will update all clients within the same domain with the new VLAN information. When the switch is in tranparent mode - it won't.
Becareful when you created a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.