Search results for query: *

Thanks Firebird

Thanks much Firebird on your recommendation. However, internet access is not available on the remote unman site. It would be a lots of paper work and approval to request internet facility on that site. That's the idea we think of a serial to ethernet port because IP ethernet is available there...

dear gents, we maintain an option 81c which is 400km away from main office. We use to remote access the switch on a TELCO PSTN line via dial up modem with no issues. The PSTN line was disconnected recently. Is there a possibility we can still access the switch remotely using the serial to...

Thanks Firebird. The Enet card is still enable. The LED is still not lit to red. My plan is to put the toggle switch to dis so the LED will be red and reseat the card without doing the disable procedures in the TTY terminal. I assume this will be okay? thanks

Thanks firebird. No access on the terminal at the moment. The enet card toggle switch in front has a LED light. I know that if it is put down that LED will lit. does this mean the cards is disabled? is it ok to reseat the card and put on the toggle switch to enable after reseating. does the...

Dear Can I manually reseat/replace a ENET card on a CS1000M NORTEL switch by only putting down the toggle switch to disable in front of the card. I have issues on logging in on the systems and I wonder if the ENET cards can be reseat doing this procedure. thank you for your feedback

Dear Gents, We have active station numbers in the M1 PABX in the MDF but not sure if all are use or with Tel Set on the end user side Is there any command to check this for type 500. IDU command in LD 20 I supposed only work on digital stations. Thank you

Many thanks @ Firebird Scrambler Cheers[smile]

Hi Firebird Scrambler. Thank you for the reply. When performing EDD on LD 43 all is okay until it reach data dump on Floppy diskette. The dump always failed. This is on both CMDU 0 and 1. As initial action I'm planning to reseat the CMDU card without doing the split mode. This might resolve the...

Hello and greetings Hope everyone is okay. Just want to confirm on 61c Nortel if If I can reseat a CMDU card without doing the split mode. The CMDU card on CPU 0 has error on LD 43 BKO. Any inputs please. Thanks guys