Thank you, Daniel_RO, for your support.
Did you try that before?
I have some concerns about doing that because the CPU may be locked or unresponsive.
Shall I need to configure the backup using command 90-57 from a handset? This stores a copy of the individual PBX's CPU.
if you wish to...
Hi All
I have SV9100 connected to the NetLink and linked to the secondary system at the same location and same switch.
I would like to change the IP addresses for both the primary and secondary systems.
In the past, I attempted this on another system and encountered issues such as CPU lock...
thanks, guys
after trying a lot of scenarios
the power Adapter should be connected to DSS the first time, after that you can operate DSS without the power adapter
Hi everyone,
I have a DSS DCK-60-1P console and an ITK-24CG-1P(BK)TEL IP Phone.
Could you please help me with the following:
1. How do I connect the DSS with the IP phone? I tried, but SV9100 didn't detect the DSS.
2. I connected the cable between the DSS and the IP Phone. Do I need an AC...
Hi All
Thank you for your suggestion
actually, I Try all the notes with no good result
2 CPUs are CP20
I restart the system
firmware the same in two CPU
password not Default
I have noticed that sometimes there are issues with DB replication when logging into the primary CPU of the system...
Hi All
SV9100 connected by NetLink, 2CPus Primary and secondary in the same location
I have an alarm in SV9100 Type:
"DB Replication fails (Primary"
and Description is: Because Secondary is in programming mode, the replication of DB cannot be executed.
Suggested action is: Log out from the...
Hi ALL
I have an SV9100 and use a phone DT900 series Model ITK-6D-1P
when I press the Enter key (from the navigation key) and then Call History then Dialed number
the phone shows the internal Dialed number by number not by name, and I was shown them by name
your help please to show them as...
Hi coralTech
I have SV9100
24 Analog trunk
300 Ip Extensions
I don't have any idea about FOIP
a want to receive fax from analoge trunk in SV9100 And save it in any device which use IP (server, pc , e-mail,.....) I ask if that possible or not.
If it possible, how can configure it?
I don't...
Hi
in NEC SV9100
how can I Use Fax over ip FOIP
nec documents are not enough
I need to recive PSTN Fax to internal PC or Ext or .....
can any body help me pleas to explain the idea and who to configure it on SV9100
thank you
Tankx CoralTech
I found the problem
it was Bilt in ST500 App
St500 unstable
when I stop it and use phone App as a Default phone app
Gt890 become more stable
@CoralTech
In site
With Vlans without priority for voice
SV9100 AND ALL EXTENSIONS are in the same VLAN
There is no problem with NEC DT900 series.
our Support said that GT890 big screen consum alot of power
We use POE+ ON CISCO SWITCHES
ALSO WE USE External power Adapter
But The problem didn't...
hello everybody
I work with SV9100 and NEC IP Phone DT900 Series and NEC SIP Phone
I have a problem with NEC SIP Phone gt890 ITX-3370 (android) and GT210 also
the problem is the sip phone suddenly disconnect progres call or unregisered at Sv9100 for a while and then reregister because when i...
thnak you CoralTech
what did you mean by P-Codes
i don't have P-code
did you mean Account code
any way
the PBX is SV9100 and it used in hotel So I can not use account code for each room guest.
Hi All
Sl2100 / InReport
If EXt 210 dosen't have permission to make outgoing calls (trunk call)
and EXT 210 make a call To Operatpr (EXT 200 ) after that operator transfer call to Trunk and dial outside Number and hangup
the call establised bettwen EXT 210 and outside Party.
but inreport...
Thank you OldNECguy
Yes I made extension 500 as a pilot number for 300, 301,302
I set 08-1012 to '0' and set 13-69 to '0'
but no result (No missed Call)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.