Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    No. MS Server 2012 and a bunch of Windows Embedded Standard clients.
  2. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    I figured it out. In looking at the number of drops I was pretty sure there was another culprit. What I tried was issuing the following command to the POLRE port: switchport block multicast Once I did that the camera and port instantly started working. I am now going to have to find the device...
  3. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    So for a comparison I plugged the POLRE into a stand alone switch (nothing else running and not connected to any device). The camera worked fine and here are the stats: GigabitEthernet1/0/3 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is 0023.5d74.0683 (bia...
  4. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    According to what I have read the uplink ports on the POLRE are 100 full duplex. The extender ports are 10 full duplex. From the spec sheet: Interface: Ethernet Uplink (Trunk IP) 2 RJ45 ports: 10/100 Base-T auto-sensing, independent speed selection, Ethernet IEEE 802.3, CAT5 copper cable...
  5. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    I agree on the speed setup and the duplex settings. I simply tried them as this POLRE wants 100Mbps and full duplex. I have removed those settings. here is the sh interface and some ping stats: CCGRC#show interfaces gi1/47 GigabitEthernet1/47 is up, line protocol is up (connected) Hardware is...
  6. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    I have now run wireshark while the POLRE is connected to my 4510 to see if I could see any issues in transmission / receipt from that IP. Trying to open a web page on the IP I am seeing many tcp retransmissions, spurious retransmissions, and tcp dup acks. Unfortunately I am a complete newbie on...
  7. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    4510 - Currently Testing: switchport mode access power inline never speed 100 duplex full no cdp enable Original Config: switchport mode access 3750G: switchport mode access
  8. bmiller23

    Issues Between Cisco Network & NVT Phybridge POLRE 8 Port Extender

    Hello, I currently have a network consisting of a Cisco 4510r-e switch and a number of Cisco 3750G POE Switches ties together via fiber. IOS versions: 4510R-E - 15.0(2)SG7 3750G - 12.2(35)SE5 For stand alone testing: 3750G - IOS 15.0(2)SE2 NVT POLRE 8 Port Extender What's happening is when...

Part and Inventory Search

Back
Top