Search results for query: *

Hi all, I have this IP500 V2 8.1(63) with a digital expansion module. The carrier has changed their trunks from E1 to PRI 30 channel.The Telco is telling me that I am not sending caller ID to them so they (the telco) is sending the default caller ID out from their switch which is...

Hi all, I have a customer in a darkened location running 9.0.0.829 on an ip office , This customer wants the backlight on the 1608 sets to turn off automatically at 5 seconds thereabout after they've hung up the phone. How possible is it to achieve this please. thanks much

Hi all, How do i regenerate a licence that was once installed on a system . I have redone the SD cards and need to get the keycodes back. pplease help

thanks much...worked fine... joezzz

you could manipulate the incoming call routing on the PBX level to have calls go anywhere you desire within the PBX. The only constant for this call routing would be designated by the TELCO which is the DID dialed numbers 123XXX-199XXXX and/or 345XXX- whatever

Hi all, I have an issue and need some help please... Scenario: On IPO extension 999 if the 1st call comes in and is answered and a 2nd call is coming in the user at this extension can simply hit transfer even before the 2nd call is answered this will give the options to send The 1st call to...

what do you mean? Is it ip route or your incoming call routes... you could translate almost anything oon incoming call routes if that's what you're reffering to.

thanks much worked fine

Hi all, I am stumped on this one.. I currently have a 1220 set on a cs1k with two DN appearances key 00 9999 Key 01 9998 when a call is sent to DN 9999 the user lifts the receiver and gets this call .. however if the call is sent to DN 9998 and the user lifts the receiver he gets the...

Hi all, is there any instructional information as to the steps to be taken to reload the OS of this Access point. I have searched all over the place but nothing . Please help J