Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
M12x0 Module with CI Card
Yes I can see it. I changed the 12X0 today and a installed a different DS card. Same Issue. I also changed out the fiber cable. Only thing left I can think of is the fiber card but the M0X16 works with no issues, no mater which port I try. I'm ordering a 2 port card to try. Let me know if you...- IsItPhone
- Post #8
- Forum: Nortel: Norstar systems
-
M12x0 Module with CI Card
Corrected the post. I last left it in slot 1. I ordered another 12X0 today.- IsItPhone
- Post #6
- Forum: Nortel: Norstar systems
-
M12x0 Module with CI Card
The incoming call does not register, it does not flash the line when the call comes in. Tried using known working lines from the base system on the 12X0 the problem stays on the 12X0. Also tried changing the card to slot 2 and reprogramming for the new line numbers. Also try different fiber...- IsItPhone
- Post #3
- Forum: Nortel: Norstar systems
-
M12x0 Module with CI Card
I have a MICS unit that we needed to add 4 more pots lines to. I installed a 6 port fiber card. Have port 8 connected to the M12X0. Have the CI card installed in the M12X0 slot 1. Programmed the lines and extension to connect to the new line. (set to Appr&Ring) For me this is line L061...- IsItPhone
- Thread
- Replies: 9
- Forum: Nortel: Norstar systems
