Search results for query: *

Minor things i see its v2.0, you can upgrade it to V8.0101 (offical panasonic support will say to upgrade it 1st) Lan Settings on the main card dont got default gateway. (IPCMPR) Rest should do ok, But monday im flying to Filipines, i will be back at 22 feb... if u still have problems ( and...

Hey srry ( im bussy atm on work) can u change your (installer) password and upload your Backup DSYS ? i will look whit an NCP500 in field, ( port 35060 was an NS1000 somewhare from my field) 1st look, looks ok, if NT can call SIP ,so SIP could call NT ... Panasonic TDA/TDE/NCP/NS Series

> YOu got VOIP lines (licence) to call out to other landlines If "VOIP lines" are what you need to use Panasonic KX-NT343 phones then yes. No, The NT registrations is going into an IP-EXT card, standaart u got some (See licence screen) The KX-NT343 are working without problems for incomming...

im willing to look at your config file and try to detect someting So im my mind: you got an NCP500 YOu got VOIP lines (licence) to call out to other landlines You got SIP EXT (Licence) to register the 3rd party SIP Phones Now ur having problems from your 3rd Party Sip phones? But internal...

Yust set your DDI/MSN/ect to the DISA (501) Now every call gets trou the DISA, be sure u set the DISA whenn all busy to ... and if no dail to ... If its a NS series DISA yust consume DSP points, Older u need the VM cards for the chennels. Panasonic TDA/TDE/NCP/NS Series

is the version on the TDA newer then your maintenance console ( v2 ) if so u got an mismatch. if so .. install newer maintenance console. Panasonic TDA/TDE/NCP/NS Series

i would make an time service make an portable extension to that number (forward all) and do for example the lunch to the portable extension so they can do it auto if they prefer ( time table ) or manual by hitting the time service button Panasonic TDA/TDE/NCP/NS Series

set him in an COS number go to 2.7 (COS) 2.7.3 = Internal call block Panasonic TDA/TDE/NCP/NS Series

so even if u set the 4 Portable extensions in an PS Ring Group and you call (670) the phone gets an bussy here? I know it sounds stupid, but did u try update your TDE? Panasonic TDA/TDE/NCP/NS Series

u mean an group insite an group? that whont work. can u give me an example in your config what group u call. im lost in your explenation what u trying to do. Panasonic TDA/TDE/NCP/NS Series

ok what group and what ext goes wrong? Panasonic TDA/TDE/NCP/NS Series

may i vieuw config file? Panasonic TDA/TDE/NCP/NS Series

in the maintanance tool 2.9 (System Options) Option 4 - Right top Send CLIP of CO Caller Note some providers dont allow you to send other numbers outside to prevent wrong number to call 911/112 (aka faking numbers) so whenn u go out over an pri/isdn u seen the company CLIP / never the hold...

normaly an DID numer goes to an group ( example group 560) in that group u can difine members whit whenn to ring ( up to delayed after 6x ring) so after (example) 2x ring u can set other extensions to ring also if u make line buttons or group co or so they will flash whenn ring u can also make...

cant find your MPR ID missing number or so ( F301-402-F0C2-42F8 ) needs to be 4-4-4-4 not 4-3-4-4 safe your LIC files carefully and reupload them in the new initial reset Panasonic TDA/TDE/NCP/NS Series

u could try to system initial reset ( dont know if its factory bound tho) https://www.dropbox.com/sh/om57v0xh0i73mnl/AABviqYXuSUw48jeQpFKl9Cda?dl=0 install Maintanance console as your needs 1 - remove sd card , safe all files 2 - set new PRIVAT map on the SD card 3 - switch to system initial...

+1 on VPN, even the NS i strongly sugest it. what is your goal for the smartphones? is it located everyware and nowhare? or yust at an building (work) so they have wifi? if so build VPN for your wifi for smartphones, connect to internal PBX, ones they leave its over ( u need good coverage wifi...

Yes like obt says, and 15060 is an example in the document ( u need to set that in the UT system to if u do that) else yust firewall whit your draytek on 5060 wwhit system objects / groups whit your wan still recmmend VPN between 2 drayteks, so u dont need to do that all, if u need help whit...

does it see in the maintanance as fault? or nothing? did u try to pre install it be4 putting it in? Is it the 1st card u got? Panasonic TDA/TDE/NCP/NS Series

why : Port Forward (Port Redirection) Ports open UDP 15060 to 5060 to system Internal IP Address and not 5060 to 5060 ? btw its NT series right? or UT Series? Panasonic TDA/TDE/NCP/NS Series