Search results for query: *

Thanks a lot xs650, it is working but I had to remove one digit since it seems the DDI table takes max 8. Now how to configure the DDI for the whole list. The service provider assigned 961987xxx and I forward last three digits from router to BP. The extensions in BP are 2xxx. Do I configure...

Thanks, I will try it tomorrow and will update you.

Hi, The 2152 is for test. We will do the DDI installation where several station numbers should be routed to the BP phase after successful test. How to do route the 916987000 to 2152 via DDI translation table (cmd 2260)? please show me step by step. And also for the DDI installation where...

The station number 2152 is assigned on the BP for one test phone. How can we translate the incoming DID (916987000) to the station 2152. I am not familiar with BP and need guidance on this. thanks in advance

Hi Sir, the following is the setup from Cisco to BP WEP_SSD_JUB_FE# *Jul 14 08:37:45.757: ISDN Se0/2/0:15 Q931: RX <- SETUP pd = 8 callref = 0x3D00 Sending Complete Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capability = Speech...

Hi sir, let me give detail information service provider --->ISDN PRI--->Cisco 2821--->ISDN PRI QSIG --->BP-250--->Phone ext 2152 Service provider has assigned the pilot number 961987000 and it reaches the Cisco it is then routed to the BP-250. I am calling from mobile phone the number...

Thank you for the response. Let me clear something. The DID pilot assigned for the PBX is 916987000 and that is what I dialled from the cisco side. The BP-250 technician setup one phone with extension 2152. What I want to achieve is when I dial 916987000, the BP-250 should receive that call...

Hi, I have been assigned the task of integrating BP-250 to Cisco 2821 using ISDN PRI. I have no knowledge of BP-250 someone is doing the configuration on it and I am doing the configuration on Cisco. Outgoing calls from BP-250 to Cisco work fine. But incoming calls from Cisco side to BP-250 get...