Search results for query: *

Hello there again! So after some more test I realized that this isn’t working exactly well. I mean that after the config the tests that I have made were removing the ethernet cable from the router and pluging it back again and with this it seems that the track comes up back again and the default...

Ok, it seems that I have figure it out! The permanent route is correct and should do the job. The problem in my config was a conflict between the (icmp-echo 8.8.4.4 source-interface Vlan10) and the permanent route (ip route 8.8.4.4 255.255.255.255 Vlan10 37.98.193.1 permanent). Removing the...

Here some additional info that I found out and also tried to apply with no luck: I have also tried a permanent route (ip route 8.8.4.4 255.255.255.255 Vlan10 permanent) the track goes down as expected and static route (ip route 0.0.0.0 0.0.0.0 Dialer0 10) is used. The awkward thing is that...

[EDIT]: ip sla 1 icmp-echo 8.8.4.4 source-interface Vlan10 timeout 3000 threshold 3 frequency 3 ip sla schedule 1 life forever start-time now track 1 ip sla 1 reachability Delay down 10 up 1 ip route 0.0.0.0 0.0.0.0 Vlan10 37.98.193.1 track 1 ip route 0.0.0.0 0.0.0.0 Dialer0 10

Hello there! I came back to post some info that found out and also ask for any ideas about my new problem. After trying to implement ip sla for wan failover in the last few days, I actually understood which was exactlly the problem in my last post. So I had alredy setup my dsl and after that I...

Hello there, so after trying everything from scratch it turned out that the configurtion path that I had followed was correct. The thing that did the trick (I think:) was changing acl rules between the interfaces (dialer0 - Vlan10). Until now everything seems to work well and in the next days...

I am running a simple speed test from a pc which is connected to vlan1(192.168.1.0) and has nothing to do with the server being hosted! From the speed results that I get I understand that somehow my download is routed through my adsl and my upload is routed through my cable modem. Also when I...

With this configuration, when I run speed tests I get dowloads with my adsl line and uploads with my cable connection!

[Edit]:Sorry I couldn't edit my reply so this is the correct reply! Hello, sorry for my late response... I have been little busy... Here are the show results : sh ip int bri Cisco-887VA#sh ip int bri Interface IP-Address OK? Method Status Protocol ATM0...

Hello, sorry for my late response... I have been little busy... Here are the show results : sh ip int bri Cisco-887VA#sh ip int bri Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM up up...

Hello and thank you for the immidiate response! Below you will find the entire configuration. I have only removed some usernames and password hashes... version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ...

Hi to All! This is my first post to the portal so forgive me for any mistakes during post. I took my ccna some years ago and since then I have setup some cisco routers(mostly basic setup) but it hasn't been an everyday job! Since last year I own a cisco 887va-k9 router and I have setup my adsl...