Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jasto1137

    Basic phone on a 1224EX rings and answers but no voice path or CO dial tone on two ports

    Well, the answer to this dilemma is ridiculously simple, the supplied phone to wall 4 conductor cables were wired pin 1 to 1, pin 2 to 2 etc. They are supposed to be reversed so pin 1 goes to pin 4, 2 to pin 3 etc. Since they were not reversed, the inner pair which is the voice pair was...
  2. jasto1137

    Basic phone on a 1224EX rings and answers but no voice path or CO dial tone on two ports

    The phones all work in other positions when swapped. It is a GK-1224EX according to its name plate, and it is wired for phones 10 to 20 on the Bix blocks from the amphenol plug in connector. The second bank is not wired, and I have been unable to swap intercom numbers above 21, so it probably...
  3. jasto1137

    Basic phone on a 1224EX rings and answers but no voice path or CO dial tone on two ports

    2 Basic phones were added to a 1224EX system that had 8 phones already on it, *08 set to Basic, *01 set to class of service 1, *05 set as CO 01 to 03 on flex buttons, *13 and *14 all 10 phones set to ring day or night, phones are on ports 3 and 4 and set to station 12 and 13, just hear DC, no CO...

Part and Inventory Search

Back
Top