Search results for query: *

Since the prior servers we ordered have been discontinued we order some HP Proliant DL20 Gen 10 plus servers. We have not been able to get Mitel Standard Linus to install on these servers using Raid Drives. does anyone have any information that may be helpful to get MSL installed on these servers?

This post is a general question and not related to software versions or system type. We have avoided Streamline but we have a few scenarios where we might suggest this in the future. One question that has come up is regarding the dongles for the phones where you use a wall mount phone. I am...

My experience is the same as above it is normally always a timer in the COS. The timer must be fairly close to the actual length of the recording.

MiCollab has licenses associated with it for Audio Conferencing. If the audio conferencing is configured it would be much easier than meet-me conferencing. By default, you get 10 ports with one standard or premium UCC Bundle. Then you get another port for each 10 additional UCC Standard...

TCS117 Thank you for your quick response. We tried this setting (Suppress Redirection Headers) and it did not reduce the number of re-invites. After a packet capture and some evaluation, we determined that each call produces two re-invites each time a RAD message plays and returns to MOH...

Friday our SIP provider told us that they are receiving excessive re-invites from our Mitel system. This causes their SIP server to temporarily blacklist our IP address and all calls go silent (loss of audio) for 5 minutes. This is a new install and this problem has been happening since day 1...

Starting with the assumption the user is pressing an outgoing key or that 8 is dialing ARS... For your example above, if dialing a local number in the facility group you do not need to echo a toll digit. In numbering plan select dial rules. Select an unused rule (example 10) and change it to...

Does anyone have any experience with the Mitel RFP 112 Phones on a MiVB? How about specifically used in a remote facility?

I have an issue with Nupoint message waiting lights turning off after a set period of time. We are using mostly Mitai for message waiting. I have looked and I don't see and COS/LCOS setting that should effect this. Any ideas?