After restart of CUCM, transfer key no longer appears on 8841 phones? Looked at softkeys and everything looks correct, any suggestions would be appreciated.
I built a Translation Pattern but when I dial the number the system says "your call can not be completed". Not sure what I have wrong but any help is appreciated.
Thank you.
I am trying to forward users extensions to their cell phone without actually have a physical phone on site. Can this be done through a translation table or call route in CUCM ?
Thank you.
I am trying to setup a SMTP Relay on a 2019 Server to our Office 365. My test email look to be staying in queue and not going to office 365. Just wondering if anyone has this problem or has any tips about how the relay should be setup.
I checked both phones and the calling party search space is correct for both users, The prime extension is also correct in user management, Still not sure why user that were switch can not dial out? Thank you for any help.
I recently swapped the extension on phones at two different sites. Now neither phone can dial out? So I deleted both uses and the associated phone. Rebuilt both user and Phone and associated them with the user nd phone. Still can not dial out. Phones can receive calls from outside and...
I am trying to replace a defective 7841 set which only has one line on it with a 7821 but want to keep the same number. Do I have to delete the 7841 set first and then just rebuild the 7821 with the existing number? Any help would be appreciated.
Hello, I am trying to set up a phone to phone paging at a remote site for those users there, we currently have three sites on our CM and have no problems doing this. I built the translation patterns, route and partition as well as the group in Informacast, but when I dial the number assigned...
Some users have an "unavailable message" on their Cisco phones sometimes, they are also saying that they are left messages by customers that can not be retrieved. Any Help would be appreciated as I can not duplicate the trouble.
I have a 7841 that was working but stopped, phone just says searching for network. I reset the phone to factory settings and reprogrammed, phone worked fine for a day, today phone is not working, just says unprovisioned. I am not able to reset it to the factory settings now, any suggestions?
User phone will not go to voice mail. Set to forward after for rings or no answer? Forward/bust to VM port, line in table of VM set to answer on 2 rings. All other stations are working fine? This is the highest extension, no other extensions connected after this one? Not sure that has anything...
Have a compact ICS that is set to go to the CCR tree after 4 rings, for some reason calls are going to intercom 21's voice mail now instead of the menu. Everything seems to be programmed correctly? Any help would be appreciated.
I have the call forward set to the voice port and the rings are less then the CCR tree, mail work from outside line but not if user calls intercom? very strange, all other stations working fine?
When users call intercom 21 and the user does not answer the call will not go to voice mail? just rings and rings? any thoughts. The other phones on the system are working fine?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.